How to change rear brake pads on SEAT Ibiza IV Hatchback (6J5, 6P1) – replacement guide
SEAT Ibiza IV Hatchback (6J5, 6P1) 1.2, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.6 LPG, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.2, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.4, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.4 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.9 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.9 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.6, SEAT Ibiza IV Hatchback (6J5, 6P1) 2.0, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.4 TSI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.6 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.6 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 2.0 TDI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.2 TSI, SEAT Ibiza IV Hatchback (6J5, 6P1) 1.2 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- Please note: all work on the car – SEAT IBIZA V (6J5, 6P5) – should be done with the engine switched off.
- Step 1
Open the bonnet. Unscrew the brake fluid reservoir cap.
Step 2Secure the wheels with chocks.
Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 4
Raise the car.
Replacement: brake pads – SEAT IBIZA V (6J5, 6P5). Tip:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
Step 5
Unscrew the wheel bolts.
AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT IBIZA V (6J5, 6P5)
- Step 6

Remove the wheel.
- Step 7

Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
- Step 8

Unscrew the brake caliper fasteners. Use a combination spanner #13. Use a combination spanner #15.
- Step 9

Remove the brake caliper. Use a crowbar.
Replacement: brake pads – SEAT IBIZA V (6J5, 6P5). Tip from AUTODOC experts:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
- Step 10

Remove the brake pads.
AUTODOC recommends:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 11

Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.
AUTODOC recommends:After applying the spray, wait a few minutes.
- Step 12

Press in the brake caliper piston. Use brake caliper wind back tool.
- Step 13

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
AUTODOC recommends:Replacement: brake pads – SEAT IBIZA V (6J5, 6P5). After applying the spray, wait a few minutes.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 14

Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
Replacement: brake pads – SEAT IBIZA V (6J5, 6P5). Tip from AUTODOC:Make sure the disc surface is clean before installing the pads.
Find out which tyre and wheel sizes are compatible with the SEAT Ibiza IV Hatchback (6J5, 6P1) model
Popular maintenance tutorials for Seat Ibiza Mk4
Complete guides for changing the Brake pad set on different SEAT IBIZA models
Track expenses, manage logs, schedule replacements, and more.
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
Top 5 reasons why your car squeals | AUTODOC Tips
Transform Your Car's Look: 6 Simple Accessories You Need to Try!
Most commonly replaced car parts on SEAT IBIZA


































