How to change rear brake pads on MERCEDES-BENZ C-Class T-modell (S204) – replacement guide
MERCEDES-BENZ C-Class T-modell (S204) C 250 CGI (204.247), MERCEDES-BENZ C-Class T-modell (S204) C 200 CDI (204.201), MERCEDES-BENZ C-Class T-modell (S204) C 180 CGI (204.249), MERCEDES-BENZ C-Class T-modell (S204) C 250 CDI 4-matic (204.282), MERCEDES-BENZ C-Class T-modell (S204) C 180 CDI (204.200), MERCEDES-BENZ C-Class T-modell (S204) C 350 CDI (204.223), MERCEDES-BENZ C-Class T-modell (S204) C 350 CGI (204.257), MERCEDES-BENZ C-Class T-modell (S204) C 180 Kompressor (204.246), MERCEDES-BENZ C-Class T-modell (S204) C 200 Kompressor (204.241), MERCEDES-BENZ C-Class T-modell (S204) C 230 (204.252), MERCEDES-BENZ C-Class T-modell (S204) C 280 (204.254), MERCEDES-BENZ C-Class T-modell (S204) C 350 (204.256), MERCEDES-BENZ C-Class T-modell (S204) C 200 CDI (204.207), MERCEDES-BENZ C-Class T-modell (S204) C 220 CDI (204.208), MERCEDES-BENZ C-Class T-modell (S204) C 320 CDI (204.222), MERCEDES-BENZ C-Class T-modell (S204) C 320 CDI 4-matic (204.289), MERCEDES-BENZ C-Class T-modell (S204) C 180 Kompressor (204.245), MERCEDES-BENZ C-Class T-modell (S204) C 220 CDI (204.202), MERCEDES-BENZ C-Class T-modell (S204) C 350 CDI (204.225), MERCEDES-BENZ C-Class T-modell (S204) C 350 CDI 4-matic (204.292), MERCEDES-BENZ C-Class T-modell (S204) C 250 CDI (204.203), MERCEDES-BENZ C-Class T-modell (S204) C 220 CDI (204.208), MERCEDES-BENZ C-Class T-modell (S204) C 300 (204.254), MERCEDES-BENZ C-Class T-modell (S204) C 350 CDI (204.225), MERCEDES-BENZ C-Class T-modell (S204) C 200 CGI (204.248), MERCEDES-BENZ C-Class T-modell (S204) C 220 CDI 4-matic (204.284), MERCEDES-BENZ C-Class T-modell (S204) C 220 CDI (204.202), MERCEDES-BENZ C-Class T-modell (S204) C 180 (204.231), MERCEDES-BENZ C-Class T-modell (S204) C 250 (204.252), MERCEDES-BENZ C-Class T-modell (S204) C 350 CDI 4-matic (204.289), MERCEDES-BENZ C-Class T-modell (S204) C 300 CDI 4-matic (204.292) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- Please note: all work on the car – MERCEDES-BENZ C-CLASS T-Model (S204) – should be done with the engine switched off.
- Step 1
Open the bonnet. Unscrew the brake fluid reservoir cap.
Step 2Secure the wheels with chocks.
Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 4
Raise the car.
Replacement: brake pads – MERCEDES-BENZ C-CLASS T-Model (S204). Tip from AUTODOC:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
Step 5
Unscrew the wheel bolts.
AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS T-Model (S204)
- Step 6

Remove the wheel.
- Step 7

Detach the connector of the brake pad wear sensor. Use long nose pliers.
- Step 8

Clean the fasteners of the brake pad wear sensor wiring harness. Use a wire brush. Use WD-40 spray.
- Step 9

Unscrew the fasteners of the brake pad wear sensor wiring harness. Use Torx E10. Use a ratchet wrench.
- Step 10

Remove the fastening bolt.
- Step 11

Detach the brake pad wear sensor wiring harness.
- Step 12

Detach the brake caliper retaining spring. Use a crowbar.
- Step 13

Remove the dust boot caps of the brake caliper guide pins. Use a crowbar.
- Step 14

Unscrew the brake caliper fasteners. Use HEX No.H7. Use a ratchet wrench.
- Step 15

Spread the brake pads. Use a crowbar.
- Step 16

Remove the brake caliper.
Replacement: brake pads – MERCEDES-BENZ C-CLASS T-Model (S204). AUTODOC experts recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
- Step 17

Remove the brake pads.
AUTODOC recommends:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 18

Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
AUTODOC recommends:Replacement: brake pads – MERCEDES-BENZ C-CLASS T-Model (S204). After applying the spray, wait a few minutes.
- Step 19

Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.
AUTODOC recommends:After applying the spray, wait a few minutes.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 20

Press in the brake caliper piston. Use brake caliper wind back tool.
- Step 21

Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
Replacement: brake pads – MERCEDES-BENZ C-CLASS T-Model (S204). Professionals recommend:Make sure the disc surface is clean before installing the pads.
- Step 22

Install new brake pads.
- Step 23

Install the brake caliper and fix it.
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class T-modell (S204) model
Popular maintenance tutorials for Mercedes S204
Complete guides for changing the Brake pad set on different MERCEDES-BENZ C-CLASS models
Track expenses, manage logs, schedule replacements, and more.
DIY restoration of an old impact wrench
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
How to unlock your car without a key | AUTODOC tips
Top 5 mistakes when replacing spark plugs | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS








































