Disclaimer
How to change rear brake pad wear sensor on BMW 3 Convertible (E93) – replacement guide
downloads:
4
Views:
30
Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
BMW 3 Convertible (E93) 318 i, BMW 3 Convertible (E93) 320i, BMW 3 Convertible (E93) 325 i, BMW 3 Convertible (E93) 330i, BMW 3 Convertible (E93) 325 d, BMW 3 Convertible (E93) 320d, BMW 3 Convertible (E93) 330i, BMW 3 Convertible (E93) 330d, BMW 3 Convertible (E93) 325 i, BMW 3 Convertible (E93) 325 d, BMW 3 Convertible (E93) 320 i, BMW 3 Convertible (E93) 320 i, BMW 3 Convertible (E93) 330 i … View more
The steps may slightly vary depending on the car design.
BMW 3 Convertible (E93) 318 i, BMW 3 Convertible (E93) 320i, BMW 3 Convertible (E93) 325 i, BMW 3 Convertible (E93) 330i, BMW 3 Convertible (E93) 325 d, BMW 3 Convertible (E93) 320d, BMW 3 Convertible (E93) 330i, BMW 3 Convertible (E93) 330d, BMW 3 Convertible (E93) 325 i, BMW 3 Convertible (E93) 325 d, BMW 3 Convertible (E93) 320 i, BMW 3 Convertible (E93) 320 i, BMW 3 Convertible (E93) 330 i … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pad Wear Sensor for 3 Convertible (E93) and other BMW models
Alternative products

Brake cleaner
Copper grease
Drive socket # 10
Wheel impact socket #17
Ratchet wrench
Torque wrench
Crow bar
Wheel chock
Replacement: brake pad wear sensor – BMW 3 Convertible (E93). AUTODOC recommends:
- The replacement procedure is identical for both brake pad wear sensors on the same axle.
- Warning! Shut down the engine before starting any work – BMW 3 Convertible (E93).
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: brake pad wear sensor – BMW 3 Convertible (E93). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Remove the brake pad wear sensor from the brake pad. - Step 7
Disconnect the brake pads wear sensor. Use a crowbar. - Step 8
Unscrew the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 9
Move the part aside. - Step 10
Disconnect the brake pad wear sensor plug. - Step 11
Connect the brake pad wear sensor plug.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 3 Convertible (E93) model
Popular maintenance tutorials for BMW E93
Complete guides for changing the Brake pad wear indicator on different BMW 3 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 3 Convertible (E93)
View more
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
7 signs of faulty fuel injectors | AUTODOC tips
How do EGR valves work? | AUTODOC
Most commonly replaced car parts on BMW 3 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























