Important!
This replacement procedure can be used for:
MERCEDES-BENZ SLK (R171) 200 Kompressor (171.442), MERCEDES-BENZ SLK (R171) 350 (171.456), MERCEDES-BENZ SLK (R171) 55 AMG (171.473), MERCEDES-BENZ SLK (R171) 280 (171.454), MERCEDES-BENZ SLK (R171) 350 (171.458), MERCEDES-BENZ SLK (R171) 200 Kompressor (171.445), MERCEDES-BENZ SLK (R171) 300 (171.454), MERCEDES-BENZ SLK (R171) 55 AMG (171.473) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for SLK (R171) and other MERCEDES-BENZ models
Alternative products
How to change Anti-roll bar link on SLK R171 200 Kompressor (171.442) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – MERCEDES-BENZ SLK (R171). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Brake cleaner
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Drive socket # 13
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ SLK (R171). AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ SLK (R171) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ SLK (R171). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on SLK R171 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ SLK (R171) 200 Kompressor (171.442) 2005 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    SLK R171 350 3.5 (171.456) 2006 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – MERCEDES-BENZ SLK (R171). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ SLK (R171) 200 1.8 Kompressor (171.445) 2007 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MERCEDES-BENZ SLK 55 AMG 5.4 (171.473) 2008 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench.
  6. Step 7
    How to replace Anti Roll Bar Links on MERCEDES-BENZ SLK (R171) 2009: download PDF manuals and video instructions
    Remove the control arm plastic cover.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on SLK R171 300 3.0 (171.454) 2010 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ SLK 2011? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
  9. Step 10
    Changing of Anti Roll Bar Links on SLK R171 2004 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19.
  10. Step 11
    MERCEDES-BENZ SLK 200 Kompressor (171.442) Anti Roll Bar Links replacement: online guides and video tutorials
    Remove the stabilizer rod.
  11. Step 12
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 13
    Replacing Anti Roll Bar Links on SLK R171 2006 200 Kompressor (171.442) by yourself
    Install a new rod, tighten the fasteners. Use a crowbar.
  12. Step 14
    SLK (R171) 55 AMG 5.4 (171.473) 2007 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ SLK (R171) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ SLK (R171) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ SLK (R171)
View more
  • How to change Drop links on MERCEDES-BENZ SLK (R171) 280 3.0 (171.454) - replacement tricks
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
  • Changing Stabilizer link SLK R171 200 Kompressor (171.442) - Replacement Tips
    How to easily repair a punctured tyre | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ SLK (R171) 350 3.5 (171.456) Sway bar link replacement guide
    How to choose the right engine oil for your car | AUTODOC
  • Replace Drop link on SLK R171 - free video tips
    How to remove scratches from car plastic | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ SLK (R171) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME