Disclaimer
How to change rear anti roll bar links on MERCEDES-BENZ C-Class Coupe (CL203) – replacement guide
downloads:
3
Views:
29
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Coupe (CL203) C 180 (203.735), MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.745), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.706), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.747), MERCEDES-BENZ C-Class Coupe (CL203) C 180 Kompressor (203.746), MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.742), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.740), MERCEDES-BENZ C-Class Coupe (CL203) C 32 AMG Kompressor (203.765), MERCEDES-BENZ C-Class Coupe (CL203) C 30 CDI AMG (203.718), MERCEDES-BENZ C-Class Coupe (CL203) C 320 (203.764), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CGI Kompressor (203.743), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CDI (203.707), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.708), MERCEDES-BENZ C-Class Coupe (CL203) C 350 (203.756), MERCEDES-BENZ C-Class Coupe (CL203) C 230 (203.752), MERCEDES-BENZ C-Class Coupe (CL203) C 160 Kompressor (203.730), MERCEDES-BENZ C-Class Coupe (CL203) C 220, MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ C-Class Coupe (CL203) C 180 (203.735), MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.745), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.706), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.747), MERCEDES-BENZ C-Class Coupe (CL203) C 180 Kompressor (203.746), MERCEDES-BENZ C-Class Coupe (CL203) C 200 Kompressor (203.742), MERCEDES-BENZ C-Class Coupe (CL203) C 230 Kompressor (203.740), MERCEDES-BENZ C-Class Coupe (CL203) C 32 AMG Kompressor (203.765), MERCEDES-BENZ C-Class Coupe (CL203) C 30 CDI AMG (203.718), MERCEDES-BENZ C-Class Coupe (CL203) C 320 (203.764), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CGI Kompressor (203.743), MERCEDES-BENZ C-Class Coupe (CL203) C 200 CDI (203.707), MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI (203.708), MERCEDES-BENZ C-Class Coupe (CL203) C 350 (203.756), MERCEDES-BENZ C-Class Coupe (CL203) C 230 (203.752), MERCEDES-BENZ C-Class Coupe (CL203) C 160 Kompressor (203.730), MERCEDES-BENZ C-Class Coupe (CL203) C 220, MERCEDES-BENZ C-Class Coupe (CL203) C 220 CDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C-Class Coupe (CL203) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #11
Combination spanner #16
Drive socket # E14
Drive socket # 16
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (CL203). Tip from AUTODOC experts:
- Replace the stabiliser links on MERCEDES-BENZ C-CLASS Coupe (CL203) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (CL203). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ C-CLASS Coupe (CL203) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #11. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the fasteners connecting the stabilizer link to the steering knuckle. Use a drive socket #E14. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – MERCEDES-BENZ C-CLASS Coupe (CL203). Professionals recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners. Use a combination spanner #16. Use a drive socket #E14. Use a ratchet wrench. - Step 12
Support the rear control arm. Use a hydraulic transmission jack. - Step 13
Tighten the fasteners connecting the stabilizer link to the steering knuckle. Use a drive socket #E14. Use a torque wrench. Tighten it to 40 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Coupe (CL203) model
Popular maintenance tutorials for Mercedes CL203
Complete guides for changing the Drop links on different MERCEDES-BENZ C-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ C-Class Coupe (CL203)
View more
Why Is the Windscreen Washer Not Spraying? Solution
Top 5 brake repair mistakes | AUTODOC tips
Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
When, why, and how to change engine oil | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
























