Important!
This replacement procedure can be used for:
BMW 7 (E32) 735 i, iL View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for 7 (E32) and other BMW models
Tools
Replacement: anti roll bar links – BMW 7 (E32). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Vice
Hydraulic transmission jack
Crow bar
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on BMW 7 (E32) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – BMW 7 (E32) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on BMW E32 1986 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace BMW 7 (E32) 730 i, iL 1987 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 7 (E32)
  3. Step 5
    BMW E32 750 i, iL V12 1988 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on BMW 7 (E32) 730 i, iL V8 1989 by yourself
    Treat all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove BMW 7 SERIES 740 i, iL V8 1990 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #13. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on BMW 7 (E32) 1991: download PDF manuals and video instructions
    Move the stabiliser bar aside. Use a crowbar.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on BMW E32 730 i, iL 1992 - download illustrated guide
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on BMW 7 SERIES 1993? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – BMW 7 (E32). AUTODOC recommends:
    Examine the stabiliser bushes. Replace them if necessary.
  9. Step 11
    Grip the stabiliser link in a vice.
    Step 12
    Changing of Anti Roll Bar Links on BMW E32 1994 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 13
    BMW 7 SERIES 735 i, iL Anti Roll Bar Links replacement: online guides and video tutorials
    Unscrew the fastener of the stabiliser link bracket. Use a drive socket #13. Use a ratchet wrench.
  11. Step 14
    Replacing Anti Roll Bar Links on BMW E32 1987 730 i, iL by yourself
    Remove the fastening bolt.
  12. Step 15
    7 (E32) 740 i, iL V8 1988 Anti Roll Bar Links DIY replacement workshop manual
    Remove the stabiliser link bracket.
  13. Step 16
    Release the vice and remove the stabiliser link.
    Step 17
    Grip a new stabiliser link in a vice.
    Step 18
    How to change Anti Roll Bar Links on BMW 7 (E32) 1989 - tips and tricks
    Install the stabiliser link bracket.
  14. Step 19
    Step-by-step recommendations for DIY replacement BMW E32 1990 740 i, iL V8 Anti Roll Bar Links
    Install the fastening bolt.
  15. Step 20
    DIY replacement of Anti Roll Bar Links on BMW 7 (E32) 735 i, iL 1991 is not an issue anymore with our step-by-step tutorial
    Screw in the fastener of the stabiliser link bracket. Use a drive socket #13. Use a ratchet wrench.
  16. Step 21
    How to change Anti Roll Bar Links on BMW E32 1986 - free PDF and video manuals
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 7 (E32) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 7 (E32) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 7 (E32) Anti Roll Bar Links replacement - online guide
Tips & tricks for your BMW 7 (E32)
View more
  • How to change Drop links on BMW 7 (E32) 735 i, iL - replacement tricks
    How to fix your car with AUTODOC CLUB
  • Changing Stabilizer link BMW E32 730 i, iL - Replacement Tips
    How to remove scratches from car plastic | AUTODOC tips
  • Maintenance Hacks - BMW 7 (E32) 750 i, iL V12 Sway bar link replacement guide
    Things you should never do with your manual transmission | AUTODOC tips
  • Replace Drop link on BMW E32 - free video tips
    What to do if your check engine light is on | AUTODOC tips