Disclaimer
How to change rear anti roll bar links on ALFA ROMEO 156 Sportwagon (932) – replacement guide
downloads:
5
Views:
33
Important!
This replacement procedure can be used for:
ALFA ROMEO 156 Sportwagon (932) 1.6 16V T.SPARK. (932B4100), ALFA ROMEO 156 Sportwagon (932) 1.8 16V T.SPARK (932A3), ALFA ROMEO 156 Sportwagon (932) 2.0 16V T.SPARK (932A2), ALFA ROMEO 156 Sportwagon (932) 2.5 V6 24V (932A1), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932B2), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932B1), ALFA ROMEO 156 Sportwagon (932) 1.8 16V T.SPARK (932B31__), ALFA ROMEO 156 Sportwagon (932) 2.0 16V T.SPARK (932B21__), ALFA ROMEO 156 Sportwagon (932) 2.5 V6 24V (932B1100), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932.B2B00), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932.B1B00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932B2B, 932B2C), ALFA ROMEO 156 Sportwagon (932) 3.2 GTA (932.BXB00), ALFA ROMEO 156 Sportwagon (932) 2.0 JTS (932BXA), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932.BXC00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD 16V (932BXE00), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932BXF00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD 16V Q4 (932BXN20) … View more
The steps may slightly vary depending on the car design.
ALFA ROMEO 156 Sportwagon (932) 1.6 16V T.SPARK. (932B4100), ALFA ROMEO 156 Sportwagon (932) 1.8 16V T.SPARK (932A3), ALFA ROMEO 156 Sportwagon (932) 2.0 16V T.SPARK (932A2), ALFA ROMEO 156 Sportwagon (932) 2.5 V6 24V (932A1), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932B2), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932B1), ALFA ROMEO 156 Sportwagon (932) 1.8 16V T.SPARK (932B31__), ALFA ROMEO 156 Sportwagon (932) 2.0 16V T.SPARK (932B21__), ALFA ROMEO 156 Sportwagon (932) 2.5 V6 24V (932B1100), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932.B2B00), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932.B1B00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD (932B2B, 932B2C), ALFA ROMEO 156 Sportwagon (932) 3.2 GTA (932.BXB00), ALFA ROMEO 156 Sportwagon (932) 2.0 JTS (932BXA), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932.BXC00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD 16V (932BXE00), ALFA ROMEO 156 Sportwagon (932) 2.4 JTD (932BXF00), ALFA ROMEO 156 Sportwagon (932) 1.9 JTD 16V Q4 (932BXN20) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 156 Sportwagon (932) and other ALFA ROMEO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 17
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on ALFA ROMEO 156 Sportwagon (932) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- Please note: all work on the car – ALFA ROMEO 156 Sportwagon (932) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. ALFA ROMEO 156 Sportwagon (932) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 9
Remove the stabiliser link.Replacement: anti roll bar links – ALFA ROMEO 156 Sportwagon (932). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Ιnstall the transverse stabilizer link. - Step 12
Tighten the stabiliser link fastener. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench. - Step 13
Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 55 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALFA ROMEO 156 Sportwagon (932) model
Popular maintenance tutorials for Alfa Romeo 156 Sportwagon
Complete guides for changing the Drop links on different ALFA ROMEO 156 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALFA ROMEO 156 Sportwagon (932)
View more
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Top 5 reasons why your car squeals | AUTODOC Tips
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
Most commonly replaced car parts on ALFA ROMEO 156
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















