Disclaimer
How to change pollen filter on INFINITI G Coupe – replacement guide
downloads:
0
Views:
6
Recommended replacement interval for the part category Pollen filter : 15000 km
Important!
This replacement procedure can be used for:
INFINITI G Coupe 3.5 X, INFINITI G Coupe 3.5, INFINITI G Coupe 3.5 … View more
The steps may slightly vary depending on the car design.
INFINITI G Coupe 3.5 X, INFINITI G Coupe 3.5, INFINITI G Coupe 3.5 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for G Coupe and other INFINITI models
Alternative products

Torx bit T20
Plastic trim tool
Pliers
Replacement: pollen filter – INFINITI G Coupe. Tip from AUTODOC experts:
- Replace the cabin filter at least once every six months, in early spring and autumn seasons.
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
- Please note: all work on the car – INFINITI G Coupe – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Open the glove box. - Step 2
Remove the glove box stoppers. Use a plastic trim tool. - Step 3
Remove the glove box. - Step 4
Unscrew the fasteners on the rear panel of the glove box. Use Torx T20. - Step 5
Detach the fasteners connecting the relay to the rear panel. Use pliers. - Step 6
Remove the lower part of the rear panel. - Step 7
Remove the rear panel of the glove box. - Step 8
Unclip the cabin filter cover retainers. - Step 9
Remove the cabin filter housing cover. - Step 10
Remove the cabin filter.Replacement: pollen filter – INFINITI G Coupe. AUTODOC recommends:Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car. - Step 11
Install a new cabin filter according to the air flow direction mark. - Step 12
Reinstall the cabin filter housing cover. Make sure you hear a click indicating that it is locked in place. - Step 13
Attach the fasteners connecting the relay to the rear panel.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the INFINITI G Coupe (V35) model
Popular maintenance tutorials for G V35
Complete guides for changing the Pollen filter on different INFINITI G models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your INFINITI G Coupe
View more
Top 5 reasons why the suspension knocks | AUTODOC tips
TOP 5 mistakes during DIY oil change | AUTODOC tips
Don’t Replace, Restore: Fixing Damaged Threads at Home
How to prevent car windows from fogging up | AUTODOC tips
Most commonly replaced car parts on INFINITI G
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

















