Important!
This replacement procedure can be used for:
VAUXHALL Vectra Mk II (C) CC (Z02) 1.8 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Vectra Mk II (C) CC (Z02) and other VAUXHALL models
Tools
Replacement: ignition coil – VAUXHALL VECTRA Mk II (C) GTS. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – VAUXHALL VECTRA Mk II (C) GTS. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – VAUXHALL VECTRA Mk II (C) GTS – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Vectra C GTS 2002 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – VAUXHALL VECTRA Mk II (C) GTS. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace VAUXHALL Vectra Mk II (C) CC (Z02) 1.9 CDTI 16V 2003 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Vectra C GTS 1.8 16V 2004 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on VAUXHALL Vectra Mk II (C) CC (Z02) 1.8 2005 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove VAUXHALL VECTRA 2.8 V6 Turbo 2006 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on VAUXHALL Vectra Mk II (C) CC (Z02) 2007: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on Vectra C GTS 2.2 16V 2008 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Vectra Mk2 (C) CC (Z02) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Vectra Mk II (C) CC (Z02) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Vectra Mk II (C) CC (Z02) Ignition Coil replacement - online guide
Tips & tricks for your VAUXHALL Vectra Mk II (C) CC (Z02)
View more
  • How to change Coil pack on VAUXHALL Vectra Mk II (C) CC (Z02) 1.9 CDTI - replacement tricks
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Changing Ignition coil pack Vectra C GTS 1.9 CDTI 16V - Replacement Tips
    8 bad driving habits | AUTODOC tips
  • Maintenance Hacks - VAUXHALL Vectra Mk II (C) CC (Z02) 1.8 16V Ignition coils replacement guide
    5 mistakes made when washing the engine | AUTODOC tips
  • Replace Coil packs on Vectra C GTS - free video tips
    Car checks you need to carry out on your car after the winter | AUTODOC tips