Important!
This replacement procedure can be used for:
OPEL Vectra C Saloon (Z02) 1.8 (F69), OPEL Vectra C Saloon (Z02) 1.6 (F69) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Ignition Coil for Vectra C Saloon (Z02) and other OPEL models
Alternative products
How to change Ignition coil on Opel Vectra C Saloon 1.8 16V – step-by-step instructions for straightforward car repair Ignition coil
Tools
Replacement: ignition coil – OPEL VECTRA C. Tools you need:
Electronic spray
Torque wrench
Torx bit T40
Ratchet wrench
Crow bar
Fender cover
Replacement: ignition coil – OPEL VECTRA C. AUTODOC experts recommend:
  • The replacement procedure is the same for the ignition coils of all cylinders.
  • Please note: all work on the car – OPEL VECTRA C – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Ignition Coil on Opel Vectra C Saloon 2002 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: ignition coil – OPEL VECTRA C. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace OPEL Vectra C Saloon (Z02) 1.8 16V 2003 Ignition Coil - step-by-step manuals and video guides
    Detach the connector from the ignition coil.
  3. Step 5
    Opel Vectra C Saloon 2.2 16V (F69) 2004 Ignition Coil replacement: free workshop manuals
    Unscrew the ignition coil bolts. Use Torx T40. Use a ratchet wrench.
  4. Step 6
    Pry up the ignition coil. Use a crowbar.
    Step 7
    Changing Ignition Coil on OPEL Vectra C Saloon (Z02) 1.9 CDTI (F69) 2005 by yourself
    Take out the ignition coil from the spark plug well.
  5. Step 8
    How to remove OPEL VECTRA 2.0 DTI 16V (F69) 2006 Ignition Coil - online easy-to-follow instructions
    Clean dirt, dust and debris from inside the spark plug wells.
  6. Step 9
    How to replace Ignition Coil on OPEL Vectra C Saloon (Z02) 2007: download PDF manuals and video instructions
    Install the new ignition coil to the spark plug well.
  7. Step 10
    How hard is it to do yourself: Ignition Coil replacement on Opel Vectra C Saloon 1.8 (F69) 2008 - download illustrated guide
    Tighten the ignition coil bolts. Use Torx T40. Use a torque wrench. Tighten it to 7 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the OPEL Vectra C Saloon (Z02) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY OPEL Vectra C Saloon (Z02) Ignition Coil replacement - online guide
Tips & tricks for your OPEL Vectra C Saloon (Z02)
View more
  • How to change Coil pack on OPEL Vectra C Saloon (Z02) 2.2 DTI 16V (F69) - replacement tricks
    3 essential tips for choosing summer tyres | Get ready for warmer weather
  • Changing Ignition coil pack Opel Vectra C Saloon 1.8 16V - Replacement Tips
    How to tell if a tie rod is faulty
  • Maintenance Hacks - OPEL Vectra C Saloon (Z02) 2.2 16V (F69) Ignition coils replacement guide
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
  • Replace Coil packs on Opel Vectra C Saloon - free video tips
    Deep interior cleaning | Car transformation by detailing

Professional manuals for the most common OPEL models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
OPEL Vectra C Saloon (Z02) Ignition Coil replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME