Disclaimer
How to change headlight bulb on SEAT Toledo III (5P2) – replacement guide
downloads:
5
Views:
64
Recommended replacement interval for the part category Headlight bulb : 12 month / 15000 km
Important!
This replacement procedure can be used for:
SEAT Toledo III (5P2) 1.6, SEAT Toledo III (5P2) 2.0 FSI, SEAT Toledo III (5P2) 1.9 TDI, SEAT Toledo III (5P2) 2.0 TDI 16V, SEAT Toledo III (5P2) 1.8 TFSI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 2.0 TFSI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 1.4 16V, SEAT Toledo III (5P2) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
SEAT Toledo III (5P2) 1.6, SEAT Toledo III (5P2) 2.0 FSI, SEAT Toledo III (5P2) 1.9 TDI, SEAT Toledo III (5P2) 2.0 TDI 16V, SEAT Toledo III (5P2) 1.8 TFSI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 2.0 TFSI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 2.0 TDI, SEAT Toledo III (5P2) 1.4 16V, SEAT Toledo III (5P2) 1.4 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Headlight Bulb for Toledo III (5P2) and other SEAT models
Alternative products

Electronic spray
Flat screwdriver
Replacement: headlight bulb – SEAT TOLEDO III (5P2). Professionals recommend:
- The replacement procedure is identical for the left and right headlight bulbs.
- Replace the bulbs in both headlights at a time.
- All work should be done with the engine stopped.
Replacement: headlight bulb – SEAT TOLEDO III (5P2). Use the following procedure:
- Step 1Switch off the ignition. Open the hood.Step 2
Remove the headlight rear cover. - Step 3
Detach the bulb holder by turning it by ~30°. Remove the holder from the headlight mounting seat. - Step 4
Remove the old bulb. Use a flat screwdriver. Check the condition of the bulb holder terminals. Replace if necessary.Replacement: headlight bulb – SEAT TOLEDO III (5P2). AUTODOC recommends:Clean the bulb mounting seat on the holder. - Step 5
Install a new bulb into the holder.AUTODOC recommends:Avoid touching the bulb glass. The finger marks left on it may cause failure.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Toledo III (5P2) model
Popular maintenance tutorials for Seat Toledo 3
Complete guides for changing the Headlight bulbs on different SEAT TOLEDO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT Toledo III (5P2)
View more
Which Coolant is Best? Comparison Test | AUTODOC
How to restore a steering wheel | AUTODOC tips
5 mistakes when replacing consumables
DIY vehicle AC compressor restoration
Most commonly replaced car parts on SEAT TOLEDO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















