
Disclaimer
How to change fuel filter on MERCEDES-BENZ SPRINTER 5-t Bus – replacement guide
downloads:
1
Views:
90

Recommended replacement interval for the part category Fuel filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 5-t Box (906) 513 CDI (906.653, 906.655, 906.657) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ SPRINTER 5-t Box (906) 513 CDI (906.653, 906.655, 906.657) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for SPRINTER 5-t Bus and other MERCEDES-BENZ models
Fuel filter
Alternative products

All-purpose cleaning spray
Torx bit T20
Clic-R collar pliers
Crow bar
Fender cover
Replacement: fuel filter – MERCEDES-BENZ SPRINTER 5-t Bus. Tip from AUTODOC:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Please note: all work on the car – MERCEDES-BENZ SPRINTER 5-t Bus – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.Replacement: fuel filter – MERCEDES-BENZ SPRINTER 5-t Bus. Tip:Raise the engine cover, holding it on two sides simultaneously.Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 4Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray.
- Step 5Unplug the vacuum valve connector.
- Step 6Detach the vacuum valve from its mounting seat and set it aside. Use a crowbar.
- Step 7Detach the connector of the water-in-fuel sensor.
- Step 8Loosen the fastening clamps of the fuel filter pipes. Use a crowbar.
- Step 9Detach the tubes from the fuel filter.Replacement: fuel filter – MERCEDES-BENZ SPRINTER 5-t Bus. AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses.
- Step 10Unscrew the water-in-fuel sensor fasteners. Use Torx T20.
- Step 11Disconnect the water-in-fuel sensor from the fuel filter.
- Step 12Unclip the fuel filter retainer. Use a crowbar.
- Step 13Remove the fuel filter.
- Step 14Install a new fuel filter.AUTODOC recommends:During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality filters – MERCEDES-BENZ SPRINTER 5-t Bus.
- Step 15Fasten the fuel filter retainer. Use a crowbar.
- Step 16Install the water-in-fuel sensor.
- Step 17Screw in the water-in-fuel sensor fasteners. Use Torx T20.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Sprinter 5-T Minibus model
Popular maintenance tutorials for Mercedes Minibus 7 5T
Complete guides for changing the Fuel filters on different MERCEDES-BENZ SPRINTER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ SPRINTER 5-t Bus
View more
- How to choose the right engine oil for your car | AUTODOC
- The most common problems when buying a used car | AUTODOC
- 5 more brake repair mistakes | Stop making these brake repair mistakes
- Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
Most commonly replaced car parts on MERCEDES-BENZ SPRINTER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME