Disclaimer
How to change fuel filter on MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) – replacement guide
downloads:
6
Views:
287
Recommended replacement interval for the part category Fuel filter : 60000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 216 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 213 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 211 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 208 CDI (901.671, 902.671, 902.672) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 216 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 213 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 211 CDI (902.671, 902.672), MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) 208 CDI (901.671, 902.671, 902.672) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for SPRINTER 2-t Bus (901, 902) and other MERCEDES-BENZ models
Alternative products

Impact socket №10
Phillips screwdriver
Ratchet wrench
Fluid container
Crow bar
Fender cover
Replacement: fuel filter – MERCEDES-BENZ SPRINTER 2-t Bus (901, 902). Tip from AUTODOC:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- Please note: all work on the car – MERCEDES-BENZ SPRINTER 2-t Bus (901, 902) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Prepare a container for fluids.Step 4
Loosen the fastening clamp of the fuel filter pipe. Use a Phillips screwdriver. - Step 5
Disconnect the pipe from the fuel filter. - Step 6
Remove the fuel pressure sensor. Use a crowbar. - Step 7
Unscrew the fastener attaching the fuel supply line to the fuel filter housing. Use a Phillips screwdriver.AUTODOC recommends:Be careful! Fuel may leak from the filter housing and hoses. - Step 8
Loosen the fuel filter mounting. Use a drive socket #10. Use a ratchet wrench. - Step 9
Disconnect the fuel supply lines from the fuel filter. - Step 10
Remove the fuel filter. Put the old filter cartridge in the container. - Step 11
Install a new fuel filter.Replacement: fuel filter – MERCEDES-BENZ SPRINTER 2-t Bus (901, 902). Tip from AUTODOC experts:Make sure that the fuel filter is positioned correctly. Consider the fuel flow direction mark.During installation, take care to prevent dust and dirt from getting into the fuel filter housing.Attention! Use quality filters – MERCEDES-BENZ SPRINTER 2-t Bus (901, 902). - Step 12
Connect the fuel supply lines to the fuel filter. - Step 13
Install the fuel pressure sensor.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ Sprinter 2-T Minibus (W901, W902) model
Popular maintenance tutorials for Mercedes Sprinter 2t Minibus
Complete guides for changing the Fuel filters on different MERCEDES-BENZ SPRINTER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ SPRINTER 2-t Bus (901, 902)
View more
Top 7 signs of a bad starter
Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
2 ways to clean the EGR valve – which one is better?
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Most commonly replaced car parts on MERCEDES-BENZ SPRINTER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















