Important!
This replacement procedure can be used for:
BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 316 d, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 330 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 330 d, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 335 i, BMW 3 Touring (E91) 335 d, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 325 d, BMW 3 Touring (E91) 318 i, BMW 3 Touring (E91) 318 d, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 330 i, BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 323 i, BMW 3 Touring (E91) 330 d, BMW 3 Touring (E91) 316 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 325 d, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 328 i, BMW 3 Touring (E91) 323 i, BMW 3 Touring (E91) 335 i, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 320 d, BMW 3 Touring (E91) 320 i, BMW 3 Touring (E91) 325 i, BMW 3 Touring (E91) 330 d, BMW 3 Touring (E91) 330 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for 3 Touring (E91) and other BMW models
How to change Wheel bearing kit on BMW E91 320 d – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on BMW E91 320 d – step-by-step instructions for straightforward car repair
Wheel bearing
Tools
Replacement: wheel bearing – BMW 3 Touring (E91). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Sealant
Combination spanner #18
Drive socket # 18
HEX bit no.H6.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Crow bar
Rubber mallet
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your BMW 3 Touring (E91) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – BMW 3 Touring (E91). Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on BMW E91 2004 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 3 Touring (E91) 320 d 2005 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    BMW E91 318d 2.0 2006 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 3 Touring (E91)
  4. Step 5
    Changing Wheel Bearing on BMW 3 Touring (E91) 325d 3.0 2007 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove BMW 3 SERIES 330xd 3.0 2008 Wheel Bearing - online easy-to-follow instructions
    Unscrew the caliper bracket fastening. Use a drive socket #18. Use a tap wrench. Use a ratchet wrench.
  6. Step 8
    Remove the fastening bolts (2 pieces).
    Step 9
    How to replace Wheel Bearing on BMW 3 Touring (E91) 2009: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 10
    How hard is it to do yourself: Wheel Bearing replacement on BMW E91 320i 2.0 2010 - download illustrated guide
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – BMW 3 Touring (E91). Professionals recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  8. Step 11
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
    Step 12
    Need to know how to renew Wheel Bearing on BMW 3 SERIES 2011? This free workshop manual will help you to do it yourself
    Unscrew the brake disc fastening. Use HEX No.H6. Use a ratchet wrench.
  9. Step 13
    Changing of Wheel Bearing on BMW E91 2012 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake disc.
  10. Step 14
    Clean the wheel hub fastener. Use a wire brush. Use WD-40 spray.
    Step 15
    BMW 3 SERIES 318d 2.0 Wheel Bearing replacement: online guides and video tutorials
    Unscrew the wheel hub axle nut. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  11. Step 16
    Remove the fastening bolts.
    Step 17
    Replacing Wheel Bearing on BMW E91 2005 320 d by yourself
    Remove the hub and the bearing together, since they are a sealed unit.
    Replacement: wheel bearing – BMW 3 Touring (E91). AUTODOC experts recommend:
    If necessary, use a rubber mallet.
  12. Step 18
    3 Touring (E91) 330xd 3.0 2006 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  13. Step 19
    Treat the fastening bolts. Use a sealant.
    Step 20
    How to change Wheel Bearing on BMW 3 Touring (E91) 2007 - tips and tricks
    Install the new wheel hub with a bearing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 3 Touring (E91) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 3 Touring (E91) Wheel Bearing replacement - online guide
Tips & tricks for your BMW 3 Touring (E91)
View more
  • How to change Wheel bearings on BMW 3 Touring (E91) 320d 2.0 - replacement tricks
    How to replace the suspension on a BMW E30 Turbo | SUPERCAR AUTODOC
  • Changing Hub bearing BMW E91 320 d - Replacement Tips
    How to remove rust | AUTODOC tips
  • Maintenance Hacks - BMW 3 Touring (E91) 318d 2.0 Wheel bearing kit replacement guide
    Petrol or diesel? What's the difference between these engines? | AUTODOC
  • Replace Wheel hub bearing on BMW E91 - free video tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips