Important!
This replacement procedure can be used for:
VAUXHALL Tigra Mk I Coupe (S93) 1.4 16V, VAUXHALL Tigra Mk I Coupe (S93) 1.6 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Tigra Mk I Coupe (S93) and other VAUXHALL models
Tools
Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 13
Drive socket # 18
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Flat Screwdriver
Hydraulic strut spring compressor
Fender cover
Wheel chock
Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). AUTODOC recommends:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Please note: all work on the car – VAUXHALL TIGRA Mk I (F07) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Strut Mount on VAUXHALL TIGRA Mk I (F07) 1994 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VAUXHALL Tigra Mk I Coupe (S93) 1.4 16V 1995 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    VAUXHALL TIGRA Mk I (F07) 1.6 16V 1996 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). Tip from AUTODOC:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Strut Mount on VAUXHALL Tigra Mk I Coupe (S93) 1.6 16V 1997 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VAUXHALL TIGRA 1.4 16V 1998 Strut Mount - online easy-to-follow instructions
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Strut Mount on VAUXHALL Tigra Mk I Coupe (S93) 1999: download PDF manuals and video instructions
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  7. Step 8
    Remove the fastening bolts.
    Step 9
    How hard is it to do yourself: Strut Mount replacement on VAUXHALL TIGRA Mk I (F07) 1.4 16V 2000 - download illustrated guide
    Disconnect the steering knuckle from the shock absorber strut.
  8. Step 10
    Lower the car.
    Step 11
    Open the bonnet.
    Step 12
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 13
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
    Step 14
    Need to know how to renew Strut Mount on VAUXHALL TIGRA 1994? This free workshop manual will help you to do it yourself
    Unscrew the top fastening of the shock strut mount. Use a drive socket #13. Use a ratchet wrench.
    AUTODOC recommends:
    VAUXHALL TIGRA Mk I (F07) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  9. Step 15
    Changing of Strut Mount on VAUXHALL TIGRA Mk I (F07) 1995 won't be an issue if you follow this illustrated step-by-step guide
    Remove the suspension strut.
  10. Step 16
    VAUXHALL TIGRA 1.4 16V Strut Mount replacement: online guides and video tutorials
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). AUTODOC experts recommend:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  11. Step 17
    Replacing Strut Mount on VAUXHALL TIGRA Mk I (F07) 1997 1.4 16V by yourself
    Compress the spring.
  12. Step 18
    Tigra Mk I Coupe (S93) 1.4 16V 1998 Strut Mount DIY replacement workshop manual
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  13. Step 19
    How to change Strut Mount on VAUXHALL Tigra Mk I Coupe (S93) 1999 - tips and tricks
    Remove the strut piston rod nut. Use a flat screwdriver. Use a drive socket #19. Use a ratchet wrench.
  14. Step 20
    Step-by-step recommendations for DIY replacement VAUXHALL TIGRA Mk I (F07) 2000 1.4 16V Strut Mount
    Remove the top strut mount.
    Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). Tip:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  15. Step 21
    DIY replacement of Strut Mount on VAUXHALL Tigra Mk I Coupe (S93) 1.4 16V 1994 is not an issue anymore with our step-by-step tutorial
    Install a new top shock strut mount.
  16. Step 22
    How to change Strut Mount on VAUXHALL TIGRA Mk I (F07) 1994 - free PDF and video manuals
    Tighten the shock strut piston rod nut. Use a flat screwdriver. Use a drive socket #19. Use a torque wrench. Tighten it to 55 Nm torque.
    Replacement: strut mount – VAUXHALL TIGRA Mk I (F07). Professionals recommend:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  17. Step 23
    How to replace VAUXHALL Tigra Mk I Coupe (S93) 1.4 16V 1995 Strut Mount - step-by-step manuals and video guides
    Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Tigra Mk1 Coupe (S93) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Tigra Mk I Coupe (S93) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Tigra Mk I Coupe (S93) Strut Mount replacement - online guide
Tips & tricks for your VAUXHALL Tigra Mk I Coupe (S93)
View more
  • How to change Strut mount on VAUXHALL Tigra Mk I Coupe (S93) 1.4 16V - replacement tricks
    DIY alternator repair | AUTODOC tips
  • Changing Top mount VAUXHALL TIGRA Mk I (F07) 1.4 16V - Replacement Tips
    How to repair a chipped or cracked windscreen | AUTODOC tips
  • Maintenance Hacks - VAUXHALL Tigra Mk I Coupe (S93) 1.6 16V Top strut mount replacement guide
    How to restore a steering wheel | AUTODOC tips
  • Replace Top mounts on VAUXHALL TIGRA Mk I (F07) - free video tips
    Things you should never do with an automatic transmission | AUTODOC tips