How to carry out replacement: Brake Pad Wear Sensor E 350 CDI 3.0 (207.322) Mercedes C207
Disclaimer
Change Mercedes C207 E 500 5.5 (207.372) Brake Pad Wear Sensor yourself – manuals and video tutorials

How to change front brake pad wear sensor on MERCEDES-BENZ E-Class Coupe (C207) – replacement guide

downloads: 8
Views: 43
Download your free tutorial and fix MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI (207.302) problems yourself Download for free 1.54 MB Brake Pad Wear Sensor for Mercedes C207 Shop now
Leave a comment Open in a new tab
When to replace the Brake Pad Wear Sensor on your MERCEDES-BENZ E-CLASS
Recommended replacement interval for the part category Brake pad wear sensor : 30000 km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.323), MERCEDES-BENZ E-Class Coupe (C207) E 300 (207.355), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.359), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.373), MERCEDES-BENZ E-Class Coupe (C207) E 350 (207.356), MERCEDES-BENZ E-Class Coupe (C207) E 250 CGI (207.347), MERCEDES-BENZ E-Class Coupe (C207) E 350 CGI (207.357), MERCEDES-BENZ E-Class Coupe (C207) E 500 (207.372), MERCEDES-BENZ E-Class Coupe (C207) E 250 CDI / BlueTEC / d (207.303, 207.304), MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI (207.322), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI / d (207.302, 207.301), MERCEDES-BENZ E-Class Coupe (C207) E 200 CGI (207.348), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.365), MERCEDES-BENZ E-Class Coupe (C207) E 250 (207.336), MERCEDES-BENZ E-Class Coupe (C207) E 200 (207.334), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 350 4-matic (207.388), MERCEDES-BENZ E-Class Coupe (C207) E 220 BlueTEC (207.301), MERCEDES-BENZ E-Class Coupe (C207) E 350 BlueTEC / d (207.326), MERCEDES-BENZ E-Class Coupe (C207) E 320 (207.362), MERCEDES-BENZ E-Class Coupe (C207) E 400 (207.361), MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI (207.302) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pad Wear Sensor for E-Class Coupe (C207) and other MERCEDES-BENZ models
Alternative products
How to change Brake pad wear sensor on Mercedes C207 E 350 CDI 3.0 (207.322) – step-by-step instructions for straightforward car repair Brake pad wear sensor
SKWW-0190001 STARK Brake pad wear sensor
2,52 GBP
Shop
6121310 KRAFT Brake pad wear sensor
2,55 GBP
Shop
19186 FEBI BILSTEIN Brake pad wear sensor
3,30 GBP
Shop
1 987 474 966 BOSCH Brake pad wear sensor
3,50 GBP
Shop
280084 NK Brake pad wear sensor
3,67 GBP
Shop
56803 MAPCO Brake pad wear sensor
4,42 GBP
Shop
WK 17-107 METZGER Brake pad wear sensor
4,62 GBP
Shop
1 987 473 070 BOSCH Brake pad wear sensor
4,72 GBP
Shop
98024700 TEXTAR Brake pad wear sensor
5,88 GBP
Shop
24.8190-0410.2 ATE Brake pad wear sensor
6,28 GBP
Shop
Tools
Replacement: brake pad wear sensor – MERCEDES-BENZ E-CLASS Coupe (C207). Tools you might need:
Wire brush
Nylon cleaning brush
WD-40 spray
Electronic spray
Brake cleaner
Anti-squeal paste
Ceramic grease
Torque wrench
Combination spanner #17
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Long nose pliers
Brake caliper wind back tool
Crow bar
Wheel chock
Buy tools
Replacement: brake pad wear sensor – MERCEDES-BENZ E-CLASS Coupe (C207). Tip from AUTODOC:
  • The replacement procedure is identical for both brake pad wear sensors on the same axle.
  • The wear sensors should be replaced together with the brake pads.
  • Please note: all work on the car – MERCEDES-BENZ E-CLASS Coupe (C207) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    Secure the wheels with chocks.
    Step 3
    How to change Brake Pad Wear Sensor on Mercedes C207 2009 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 4
    Raise the car.
    Replacement: brake pad wear sensor – MERCEDES-BENZ E-CLASS Coupe (C207). AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace MERCEDES-BENZ E-Class Coupe (C207) E 350 CDI 3.0 (207.322) 2010 Brake Pad Wear Sensor - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. MERCEDES-BENZ E-CLASS Coupe (C207)
  3. Step 6
    Mercedes C207 E 250 CDI / BlueTEC / d (207.303, 207.304) 2011 Brake Pad Wear Sensor replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Brake Pad Wear Sensor on MERCEDES-BENZ E-Class Coupe (C207) E 350 CGI 3.5 (207.357) 2012 by yourself
    Detach the connector of the brake pad wear sensor. Use long nose pliers.
  5. Step 8
    How to remove MERCEDES-BENZ E-CLASS E 350 CDI (207.323) 2013 Brake Pad Wear Sensor - online easy-to-follow instructions
    Spread the brake pads. Use a crowbar.
  6. Step 9
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
    Step 10
    How to replace Brake Pad Wear Sensor on MERCEDES-BENZ E-Class Coupe (C207) 2014: download PDF manuals and video instructions
    Unscrew the brake caliper fasteners. Use a combination spanner #17. Use a drive socket #13. Use a ratchet wrench.
  7. Step 11
    How hard is it to do yourself: Brake Pad Wear Sensor replacement on Mercedes C207 E 200 CGI 1.8 (207.348) 2015 - download illustrated guide
    Remove the fastening bolts.
  8. Step 12
    Need to know how to renew Brake Pad Wear Sensor on MERCEDES-BENZ E-CLASS 2016? This free workshop manual will help you to do it yourself
    Remove the brake caliper.
    Replacement: brake pad wear sensor – MERCEDES-BENZ E-CLASS Coupe (C207). Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  9. Step 13
    Changing of Brake Pad Wear Sensor on Mercedes C207 2009 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads.
  10. Step 14
    MERCEDES-BENZ E-CLASS E 500 5.5 (207.372) Brake Pad Wear Sensor replacement: online guides and video tutorials
    Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  11. Step 15
    Replacing Brake Pad Wear Sensor on Mercedes C207 2011 E 350 CDI 3.0 (207.322) by yourself
    Treat the brake caliper piston. Use a nylon cleaning brush. Use a brake cleaner.
    AUTODOC recommends:
    Replacement: brake pad wear sensor – MERCEDES-BENZ E-CLASS Coupe (C207). After applying the spray, wait a few minutes.
  12. Step 16
    E-Class Coupe (C207) E 350 CDI (207.323) 2012 Brake Pad Wear Sensor DIY replacement workshop manual
    Press in the brake caliper piston. Use brake caliper wind back tool.
  13. Step 17
    How to change Brake Pad Wear Sensor on MERCEDES-BENZ E-Class Coupe (C207) 2013 - tips and tricks
    Attach the new wear sensor to the new pad.
  14. Step 18
    Step-by-step recommendations for DIY replacement Mercedes C207 2014 E 350 CDI (207.323) Brake Pad Wear Sensor
    Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
    AUTODOC recommends:
    Make sure the disc surface is clean before installing the pads.
  15. Step 19
    DIY replacement of Brake Pad Wear Sensor on MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI / d (207.302, 207.301) 2015 is not an issue anymore with our step-by-step tutorial
    Install the brake pads.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ E-Class Coupe (C207) model

Mercedes C207 tyre size

Popular maintenance tutorials for Mercedes C207

More manuals for Mercedes C207

Complete guides for changing the Brake pad wear indicator on different MERCEDES-BENZ E-CLASS models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ E-Class Coupe (C207) Brake Pad Wear Sensor replacement - online guide
Tips & tricks for your MERCEDES-BENZ E-Class Coupe (C207)
View more
  • How to change Brake pad wear indicator on MERCEDES-BENZ E-Class Coupe (C207) E 220 CDI / d (207.302, 207.301) - replacement tricks
    Top 5 reasons why your car squeals | AUTODOC Tips
    8K views
    Published on: 26/10/2023
  • Changing Brake pad sensor Mercedes C207 E 350 CDI 3.0 (207.322) - Replacement Tips
    5 causes of turbocharger failure and how to avoid them
    12K views
    Published on: 04/04/2024
  • Maintenance Hacks - MERCEDES-BENZ E-Class Coupe (C207) E 250 CDI / BlueTEC / d (207.303, 207.304) Brake wear indicator replacement guide
    K2 ROTON wheel cleaner overview
    2K views
    Published on: 27/03/2025
  • Replace Brake wear sensor on Mercedes C207 - free video tips
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
    6K views
    Published on: 13/05/2021

Most commonly replaced car parts on MERCEDES-BENZ E-CLASS

Professional manuals for the most common MERCEDES-BENZ models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ E-Class Coupe (C207) Brake Pad Wear Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME