Disclaimer
How to change front anti roll bar links on RENAULT Kangoo II Be Bop (KW) – replacement guide
downloads:
0
Views:
6
Important!
This replacement procedure can be used for:
RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi (KW0G), RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi (KW0F), RENAULT KANGOO BE BOP (KW0/1_) 1.6 (KW0D), RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi 75, RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi (KW0G), RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi (KW0F), RENAULT KANGOO BE BOP (KW0/1_) 1.6 (KW0D), RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi 75, RENAULT KANGOO BE BOP (KW0/1_) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for KANGOO BE BOP (KW0/1_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #15
Combination spanner #17
Drive socket # 14
HEX bit No.H6
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT KANGOO BE BOP (KW0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT KANGOO BE BOP (KW0/1_). Take the following steps:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT KANGOO BE BOP (KW0/1_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use HEX No.H6. Use a combination spanner #17. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H6. Use a combination spanner #17. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT KANGOO BE BOP (KW0/1_). Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Kangoo II Be Bop (KW) model
Popular maintenance tutorials for Renault Kangoo KW
Complete guides for changing the Drop links on different RENAULT KANGOO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT KANGOO BE BOP (KW0/1_)
View more
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Top 5 car noises you shouldn't ignore
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
5 possible reasons why your car heater isn't working
Most commonly replaced car parts on RENAULT KANGOO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























