Important!

This replacement procedure can be used for:
CITROËN C4 Grand Picasso II 1.6 VTi, CITROËN C4 Grand Picasso II 1.6 THP, CITROËN C4 Grand Picasso II 1.6 HDi, CITROËN C4 Grand Picasso II 1.6 HDi / BlueHDi, CITROËN C4 Grand Picasso II 2.0 BlueHDi, CITROËN C4 Grand Picasso II 1.6 THP, CITROËN C4 Grand Picasso II 1.6 BlueHDi, CITROËN C4 Grand Picasso II 1.2 THP, CITROËN C4 Grand Picasso II 1.6 BlueHDi, CITROËN C4 Grand Picasso II 2.0 BlueHDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. Tools you need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Brake cleaner 
                    
                      Copper grease 
                    
                      Combination spanner #16
                    
                      Drive socket # 15 
                    
                      Drive socket # 17 
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Wheel chock

Buy tools

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. AUTODOC experts recommend:

Replace the stabiliser links on CITROËN C4 Grand Picasso II in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.

Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. AUTODOC recommends:
To avoid injury, hold up the wheel when unscrewing the bolts.
Step 5

Remove the wheel.
Step 6

Remove the ABS wiring harness bracket.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #15. Use a ratchet wrench.
Step 9

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 10

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #15. Use a ratchet wrench.
Step 11

Remove the stabilizer rod.

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. Tip from AUTODOC experts:
Examine stabiliser bushes. Replace them if needed.
Step 12

Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 13

Install a new rod, tighten the fasteners.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 15

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a torque wrench. Tighten it to 36 Nm torque.
Step 16

Treat all joints of the stabiliser link. Use copper grease.
Step 17

Install the ABS wiring harness bracket.
Step 18

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 19

Clean the brake disk surface. Use a brake cleaner.

AUTODOC recommends:
Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. After applying the spray, wait a few minutes.
Step 20

Install the wheel.

Replacement: anti roll bar links – CITROËN C4 Grand Picasso II. Tip from AUTODOC:
To avoid injury, hold up the wheel when screwing in the fastening bolts.
Step 21

Screw in the wheel bolts. Use wheel impact socket #17.
Step 22

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 100 nm torque.
Step 23

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C4 II Grand Picasso model

Citroen C4 Grand Picasso MK2 tyre size

How to change rear brake discs on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 2.31 MB
How to change spark plugs on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 1.16 MB
How to change engine oil and filter on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 1.17 MB
How to change fuel filter on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 931.84 KB
How to change ignition coil on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 890.88 KB
How to change lambda sensor on CITROËN C4 Grand Picasso II – replacement guide

Free download PDF 849.92 KB

How to change front anti roll bar links on CITROËN C4 Picasso II – replacement guide

Free download PDF 1.36 MB
How to change front anti roll bar links on CITROËN C4 CACTUS – replacement guide

Free download PDF 1.25 MB
How to change front anti roll bar links on CITROËN C4 II (B7) – replacement guide

Free download PDF 1.33 MB
How to change front anti roll bar links on CITROËN C4 Grand Picasso I (UA_) – replacement guide

Free download PDF 1.35 MB
How to change front anti roll bar links on CITROËN C4 Picasso I (UD_) – replacement guide

Free download PDF 1.35 MB
How to change front anti roll bar links on CITROËN C4 I (LC_) – replacement guide

Free download PDF 1.34 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

Why Checking Your Oil is Crucial for Engine Performance

6K views

Published on: 23/02/2023
Three ways to change oil without a lift

23K views

Published on: 18/09/2025
Most drivers destroy their suspension this way

7K views

Published on: 09/07/2026
K2 ROTON wheel cleaner overview

4K views

Published on: 27/03/2025