
Disclaimer
How to change front anti roll bar links on CITROËN C4 CACTUS – replacement guide
downloads:
19
Views:
266
Important!
This replacement procedure can be used for:
CITROËN C4 CACTUS 1.2 VTi, CITROËN C4 CACTUS 1.6 HDi, CITROËN C4 CACTUS 1.2 VTi / PureTech, CITROËN C4 CACTUS 1.2 THP, CITROËN C4 CACTUS 1.6 BlueHDi, CITROËN C4 CACTUS 1.2 PureTech, CITROËN C4 CACTUS 1.5 BlueHDi, CITROËN C4 CACTUS 1.5 BlueHDi, CITROËN C4 CACTUS 1.5 BlueHDi … View more
The steps may slightly vary depending on the car design.
CITROËN C4 CACTUS 1.2 VTi, CITROËN C4 CACTUS 1.6 HDi, CITROËN C4 CACTUS 1.2 VTi / PureTech, CITROËN C4 CACTUS 1.2 THP, CITROËN C4 CACTUS 1.6 BlueHDi, CITROËN C4 CACTUS 1.2 PureTech, CITROËN C4 CACTUS 1.5 BlueHDi, CITROËN C4 CACTUS 1.5 BlueHDi, CITROËN C4 CACTUS 1.5 BlueHDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C4 CACTUS and other CITROËN models
Anti-roll bar link
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torx bit T30
Drive socket # 17
Combination spanner #17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on CITROËN C4 CACTUS in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C4 CACTUS. Recommended sequence of steps:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C4 CACTUS
- Step 5Remove the wheel.
- Step 6Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
- Step 8Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
- Step 9Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use Torx T30. Use a ratchet wrench.
- Step 10Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN C4 CACTUS. Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed.
- Step 11Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
- Step 12Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C4 II Cactus model
Popular maintenance tutorials for Citroen C4 Cactus
Complete guides for changing the Drop links on different CITROËN C4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C4 CACTUS
View more
- 5 causes of turbocharger failure and how to avoid them
- How I started restoring a driveshaft | Drivetrain restoration – Part 1
- Top 5 reasons why your car squeals | AUTODOC Tips
- How to prevent car windows from fogging up | AUTODOC tips
Most commonly replaced car parts on CITROËN C4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME