Important!

This replacement procedure can be used for:
BMW Z4 Roadster (E85) 3.0i, BMW Z4 Roadster (E85) 2.5i, BMW Z4 Roadster (E85) 2.2i, BMW Z4 Roadster (E85) 2.0i, BMW Z4 Roadster (E85) 2.5i, BMW Z4 Roadster (E85) 2.5si, BMW Z4 Roadster (E85) 3.0 si, BMW Z4 Roadster (E85) M, BMW Z4 Roadster (E85) 2.5si … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Alternative products

Anti-roll bar link

Replacement: anti roll bar links – BMW Z4 (E85). Tools you'll need:

                      Wire brush
                    
                      WD-40 spray
                    
                      Copper grease 
                    
                      Combination spanner #17
                    
                      Drive socket # 17 
                    
                      HEX bit no.H7
                    
                      Wheel impact socket #17
                    
                      Ratchet wrench
                    
                      Torque wrench
                    
                      Fender cover
                    
                      Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on BMW Z4 (E85) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Warning! Shut down the engine before starting any work – BMW Z4 (E85).

Carry out replacement in the following order:

Step 1

Open the hood.

Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.

Step 3

Secure the wheels with chocks.
Step 4

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 5

Raise the front of the car and secure on supports.

Step 6

Unscrew the wheel bolts.

AUTODOC recommends:
Important! Hold the wheel while unscrewing the fastening bolts. BMW Z4 (E85)
Step 7

Remove the wheel.
Step 8.1

Clean the stabiliser link fasteners.

Step 8.2

Use a wire brush. Use WD-40 spray.
Step 9

Unscrew the fastener connecting the stabilizer link to the shock strut. Use HEX No.H7. Use a combination spanner #17. Use a ratchet wrench.
Step 10

Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use HEX No.H7. Use a combination spanner #17. Use a ratchet wrench.
Step 11

Remove the stabilizer rod.
Step 12

Install a new rod, tighten the fasteners.
Step 13

Tighten the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a combination spanner #17. Use a torque wrench. Tighten it to 55 Nm torque.
Step 14

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a drive socket #17. Use a combination spanner #17. Use a torque wrench. Tighten it to 55 Nm torque.
Step 15.1

Treat all joints of the stabiliser link.

Step 15.2

Use copper grease.
Step 16

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.
Step 17

Install the wheel.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while screwing in the fastening bolts on the car. BMW Z4 (E85)
Step 18

Screw in the wheel bolts. Use wheel impact socket #17.
Step 19

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 20

Remove the jacks and chocks.

Step 21

Remove the fender protection cover.

Step 22

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW Z4 Roadster (E85) model

BMW Z4 E85 tyre size

How to change rear strut mount on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
2.94 MB
How to change front lower arm on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
2.8 MB
How to change rear suspension lower control arm on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
1.83 MB
How to change front wheel bearing on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
2.07 MB
How to change front strut mount on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
2.43 MB
How to change track rod end on BMW Z4 Roadster (E85) – replacement guide

Free download PDF
1.53 MB

How to change front anti roll bar links on BMW Z4 Roadster (E89) – replacement guide

Free download PDF
1.15 MB
How to change front anti roll bar links on BMW Z4 Coupe (E86) – replacement guide

Free download PDF
2.13 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on BMW E36 – replacement guide

Free download PDF
1.55 MB
How to change front anti roll bar links on BMW E90 – replacement guide

Free download PDF
1.15 MB
How to change rear anti roll bar links on BMW E36 – replacement guide

Free download PDF
1.74 MB

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project

2K views

Published on: 04/03/2021
Why Checking Your Oil is Crucial for Engine Performance

6K views

Published on: 23/02/2023
Which Coolant is Best? Comparison Test | AUTODOC

9K views

Published on: 13/10/2022
Regain Your Confidence on the Road: Easy Headlight Restoration Tips

10K views

Published on: 04/07/2024