Disclaimer
How to change front ABS sensor on VW PASSAT Estate Van (365) – replacement guide
downloads:
0
Views:
3
Important!
This replacement procedure can be used for:
VW PASSAT Estate Van (365) 2.0 TSI, VW PASSAT Estate Van (365) 3.6 FSi 4motion, VW PASSAT Estate Van (365) 2.0 TDi BlueMotion, VW PASSAT Estate Van (365) 1.8 TSI, VW PASSAT Estate Van (365) 2.0 TDi BlueMotion, VW PASSAT Estate Van (365) 1.6 TDi BlueMotion, VW PASSAT Estate Van (365) 1.4 TSi BlueMotion … View more
The steps may slightly vary depending on the car design.
VW PASSAT Estate Van (365) 2.0 TSI, VW PASSAT Estate Van (365) 3.6 FSi 4motion, VW PASSAT Estate Van (365) 2.0 TDi BlueMotion, VW PASSAT Estate Van (365) 1.8 TSI, VW PASSAT Estate Van (365) 2.0 TDi BlueMotion, VW PASSAT Estate Van (365) 1.6 TDi BlueMotion, VW PASSAT Estate Van (365) 1.4 TSi BlueMotion … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for PASSAT Estate Van (365) and other VW models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – VW PASSAT Kasten/Kombi (365). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – VW PASSAT Kasten/Kombi (365). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW PASSAT Kasten/Kombi (365) - Step 5
Remove the wheel. - Step 6
Detach the ABS sensor connector. - Step 7
Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench. - Step 9
Disconnect the ABS sensor. - Step 10
Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray. - Step 11
Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver. - Step 12
Connect the ABS sensor. - Step 13
Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Passat B7 Box Body / Estate (365) model
Popular maintenance tutorials for VW PASSAT Kasten/Kombi (365)
Complete guides for changing the Wheel speed sensor on different VW PASSAT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW PASSAT Estate Van (365)
View more
How to remove scratches from car plastic | AUTODOC tips
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Which Coolant is Best? Comparison Test | AUTODOC
Most commonly replaced car parts on VW PASSAT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























