Disclaimer
How to change engine oil and filter on PORSCHE 924 Coupe – replacement guide
downloads:
9
Views:
300
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
PORSCHE 924 Coupe 2.0 Carrera GT, PORSCHE 924 Coupe 2.0 Turbo, PORSCHE 924 Coupe 2.0 Turbo, PORSCHE 924 Coupe 2.0 … View more
The steps may slightly vary depending on the car design.
PORSCHE 924 Coupe 2.0 Carrera GT, PORSCHE 924 Coupe 2.0 Turbo, PORSCHE 924 Coupe 2.0 Turbo, PORSCHE 924 Coupe 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for 924 Coupe and other PORSCHE models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Combination spanner #19
Drive socket # 19
Oil filter cup socket #74-15F
Ratchet wrench
Fluid container
Funnel
Fender cover
Replacement: engine oil and filter – PORSCHE 924. AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Please note: all work on the car – PORSCHE 924 – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the oil filler plug. - Step 4
Pull up the oil dipstick. - Step 5Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – PORSCHE 924. Professionals recommend:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.All work should be done with the engine stopped.Step 6
Put a waste oil container with at least 5 l capacity under the drainage hole. - Step 7
Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray. - Step 8
Unscrew the drain plug. Use a combination spanner #19. - Step 9
Drain the used oil.Replacement: engine oil and filter – PORSCHE 924. AUTODOC recommends:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 10
Unscrew the oil filter. Use the 74-15F socket. Use a ratchet wrench. - Step 11
Clean the oil filter seat. Use all-purpose cleaning spray. - Step 12
Lubricate the rubber seal of the new filter with a little amount of fresh oil. - Step 13
Screw the new filter into its place. Use the 74-15F socket. Use a torque wrench. Tighten it to 25 Nm torque. - Step 14
Clean the area of the oil pan drainage hole. - Step 15
Screw in the new drainage plug and tighten it. Use a drive socket #19. Use a torque wrench. Tighten it to 25 Nm torque. - Step 16
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PORSCHE 924 Coupe model
Popular maintenance tutorials for Porsche 924 Coupe
Complete guides for changing the Oil filters on different PORSCHE 924 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PORSCHE 924 Coupe
View more
How to Fix a Squealing Belt: Causes & Solutions | AUTODOC Expert Tips
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
Engine Overheating? Replace Your Cooling Fan to Fix It
5 most common causes of oil leaks | AUTODOC tips
Most commonly replaced car parts on PORSCHE 924
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















