Disclaimer
How to change spark plugs on SKODA FABIA (NJ3) – replacement guide
downloads:
39
Views:
567
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
SKODA FABIA (NJ3) 1.2 TSI, SKODA FABIA (NJ3) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
SKODA FABIA (NJ3) 1.2 TSI, SKODA FABIA (NJ3) 1.2 TSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for FABIA (NJ3) and other SKODA models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Fender cover
Replacement: spark plugs – SKODA FABIA (NJ3). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- Please note: all work on the car – SKODA FABIA (NJ3) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fasteners and disconnect the ground wires from the ignition coils. Use a drive socket #10. Use a ratchet wrench. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench. - Step 6
Remove the fastening bolts. - Step 7
Take out the ignition coils from the spark plug wells. - Step 8
Clean dirt, dust and debris from inside the spark plug wells. - Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 12
Install the new spark plugs into their mounting seats.Replacement: spark plugs – SKODA FABIA (NJ3). AUTODOC experts recommend:Lower the spark plugs into the wells carefully, making sure not to damage the electrode gap. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 28 nm torque.Replacement: spark plugs – SKODA FABIA (NJ3). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SKODA Fabia III Hatchback (NJ3) model
Popular maintenance tutorials for Skoda Fabia 3
Complete guides for changing the Engine spark plug on different SKODA FABIA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SKODA FABIA (NJ3)
View more
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
Top 10 most useful car life hacks
TOP 8 mistakes car owners make | AUTODOC tips
Most commonly replaced car parts on SKODA FABIA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























