Disclaimer
How to change spark plugs on CITROËN C5 III Estate (RW_) – replacement guide
downloads:
6
Views:
35
Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
CITROËN C5 III Estate (RW_) 1.6 THP, CITROËN C5 III Estate (RW_) 1.6 THP, CITROËN C5 III Estate (RW_) 1.6 VTI … View more
The steps may slightly vary depending on the car design.
CITROËN C5 III Estate (RW_) 1.6 THP, CITROËN C5 III Estate (RW_) 1.6 THP, CITROËN C5 III Estate (RW_) 1.6 VTI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for C5 III Estate (RW_) and other CITROËN models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Torque wrench
Drive socket # 8
Spark plug socket # 14
Ratchet wrench
Fender cover
Replacement: spark plugs – CITROËN C5 III Break (TD_). AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – CITROËN C5 III Break (TD_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use a drive socket #8. Use a ratchet wrench. - Step 4
Remove the engine cover.AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it. - Step 5
Unplug the connectors from the ignition coils. - Step 6
Take out the ignition coil from the spark plug well.Replacement: spark plugs – CITROËN C5 III Break (TD_). Tip from AUTODOC:Remember the sequence of steps for ignition coil demounting. - Step 7
Clean dirt, dust and debris from inside the spark plug wells. - Step 8
Unscrew the spark plugs. Use the spark plug socket #14. - Step 9
Take out the spark plugs. - Step 10
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 11
Install the new spark plugs into their mounting seats. - Step 12
Screw new spark plugs and tighten them. Use the spark plug socket #14. Use a torque wrench. Tighten it to 25 nm torque.AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C5 III Estate (RW) model
Popular maintenance tutorials for CITROËN C5 III Break (TD_)
Complete guides for changing the Engine spark plug on different CITROËN C5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C5 III Estate (RW_)
View more
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
How to remove rust | AUTODOC tips
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
Most commonly replaced car parts on CITROËN C5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























