How to carry out replacement: Poly V-Belt 1.9 TD CITROËN ZX Break (N2)
Disclaimer
Change CITROËN ZX Break (N2) 1.9 TD Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on CITROËN ZX Break (N2) – replacement guide

downloads: 0
Views: 8
Download your free tutorial and fix CITROËN ZX Break (N2) 1.5 D problems yourself Download for free 1.17 MB Poly V-Belt for CITROËN ZX Break (N2) Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your CITROËN ZX
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN ZX Break (N2) 1.9 D, CITROËN ZX Break (N2) 1.9 TD, CITROËN ZX Break (N2) 1.9 D, CITROËN ZX Break (N2) 1.8 D, CITROËN ZX Break (N2) 1.9 D, CITROËN ZX Break (N2) 1.8 D … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for ZX Break (N2) and other CITROËN models
Alternative products
How to change Serpentine belt on CITROËN ZX Break (N2) 1.9 TD – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – CITROËN ZX Break (N2). List of the tools you'll need:
Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Buy tools
Replacement: serpentine belt – CITROËN ZX Break (N2). Tools you might need:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN ZX Break (N2). Use the following procedure:
  1. Step 1
    Open the hood.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to change Poly V-Belt on CITROËN ZX Break (N2) 1993 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 5
    Raise the car.
    Replacement: serpentine belt – CITROËN ZX Break (N2). AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 6
    How to replace CITROËN ZX Break (N2) 1.9 TD 1994 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN ZX Break (N2)
  3. Step 7
    CITROËN ZX Break (N2) 1.9 D 1995 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 8
    Changing Poly V-Belt on CITROËN ZX Break (N2) 1.6 i 1996 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver.
  5. Step 9
    How to remove CITROËN ZX 1.8 i 16V 1997 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 10
    How to replace Poly V-Belt on CITROËN ZX Break (N2) 1998: download PDF manuals and video instructions
    Release the coolant pipe fasteners.
  7. Step 11
    How hard is it to do yourself: Poly V-Belt replacement on CITROËN ZX Break (N2) 1.8 D 1999 - download illustrated guide
    Clean the tensioner pulley fastener. Use a wire brush.
  8. Step 12
    Need to know how to renew Poly V-Belt on CITROËN ZX 1993? This free workshop manual will help you to do it yourself
    Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench.
  9. Step 13
    Changing of Poly V-Belt on CITROËN ZX Break (N2) 1994 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench.
  10. Step 14
    CITROËN ZX 1.9 TD Poly V-Belt replacement: online guides and video tutorials
    Remove the V-ribbed belt.
    Replacement: serpentine belt – CITROËN ZX Break (N2). Tip from AUTODOC experts:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  11. Step 15
    Replacing Poly V-Belt on CITROËN ZX Break (N2) 1996 1.9 TD by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – CITROËN ZX Break (N2). Professionals recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  12. Step 16
    ZX Break (N2) 1.8 i 16V 1997 Poly V-Belt DIY replacement workshop manual
    Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.
    Replacement: serpentine belt – CITROËN ZX Break (N2). Tip:
    Keep the belt taut until you've tightened the tensioner pulley fastener.
  13. Step 17
    How to change Poly V-Belt on CITROËN ZX Break (N2) 1998 - tips and tricks
    Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN ZX Estate (N2) model

CITROËN ZX Break (N2) tyre size

Popular maintenance tutorials for CITROËN ZX Break (N2)

More manuals for CITROËN ZX Break (N2)

Complete guides for changing the Alternator belt on different CITROËN ZX models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN ZX Break (N2) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN ZX Break (N2)
View more
  • How to change Alternator belt on CITROËN ZX Break (N2) 1.4 i - replacement tricks
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    14K views
    Published on: 15/06/2023
  • Changing Auxiliary belt CITROËN ZX Break (N2) 1.9 TD - Replacement Tips
    #DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
    7K views
    Published on: 05/08/2021
  • Maintenance Hacks - CITROËN ZX Break (N2) 1.9 D Poly V-belt replacement guide
    Deep interior cleaning | Car transformation by detailing
    7K views
    Published on: 05/09/2024
  • Replace Drive belt on CITROËN ZX Break (N2) - free video tips
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020

Most commonly replaced car parts on CITROËN ZX

Professional manuals for the most common CITROËN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN ZX Break (N2) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME