
Disclaimer
How to change serpentine belt on CITROËN C4 I Saloon – replacement guide
downloads:
4
Views:
36

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
CITROËN C4 Saloon L 1.6 16V … View more
The steps may slightly vary depending on the car design.
CITROËN C4 Saloon L 1.6 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for C4 Saloon L and other CITROËN models
Serpentine belt
V-Ribbed Belt Set

Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – CITROËN C4 Saloon L. Tools you might need:
- All work should be done with the engine stopped.
Replacement: serpentine belt – CITROËN C4 Saloon L. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Secure the wheels with chocks.Step 4Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 5Raise the car.Replacement: serpentine belt – CITROËN C4 Saloon L. AUTODOC recommends:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 6Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C4 Saloon L
- Step 7Remove the wheel.
- Step 8Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver.
- Step 9Remove the wheel arch cover.
- Step 10Release the coolant pipe fasteners.
- Step 11Clean the tensioner pulley fastener. Use a wire brush.
- Step 12Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench.
- Step 13Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench.
- Step 14Remove the V-ribbed belt.Replacement: serpentine belt – CITROËN C4 Saloon L. Tip from AUTODOC experts:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 15Install the V-ribbed belt.Replacement: serpentine belt – CITROËN C4 Saloon L. Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 16Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.Replacement: serpentine belt – CITROËN C4 Saloon L. Tip:Keep the belt taut until you've tightened the tensioner pulley fastener.
- Step 17Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C4 I Saloon model
Popular maintenance tutorials for CITROËN C4 Saloon L
Complete guides for changing the Alternator belt on different CITROËN C4 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C4 Saloon L
View more
- How to replace a timing chain yourself
- 5 Essential Tips for beginner drivers: Avoid Common Mistakes
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- Checking the starter without removing it | AUTODOC tips
Most commonly replaced car parts on CITROËN C4
Time to replace parts? Get even better deals in our Shop app.

SCAN ME