How to carry out replacement: Wheel Bearing 1800i VAUXHALL Cavalier Mk2 Cabrio (J82)
Disclaimer
Change VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on VAUXHALL Cavalier Mk2 Convertible (J82) – replacement guide

downloads: 0
Views: 1
Download your free tutorial and fix VAUXHALL Cavalier Mk2 Convertible (J82) 1800i problems yourself Download for free 2.06 MB Wheel Bearing for VAUXHALL Cavalier Mk2 Cabrio (J82) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VAUXHALL Cavalier Mk2 Convertible (J82) 1800i, VAUXHALL Cavalier Mk2 Convertible (J82) 1800i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Cavalier Mk2 Convertible (J82) and other VAUXHALL models
How to change Wheel bearing kit on VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing kit on Cavalier Mk2 Convertible (J82) – tips for proper car maintenance
Wheel bearing kit for Cavalier Mk2 Convertible (J82) Petrol (112 hp)
Simple DIY car repair steps – Replacing Wheel bearing kit on Cavalier Mk2 Convertible (J82)
Wheel bearing kit for Cavalier Mk2 Convertible (J82) Petrol (115 hp)
Tools
Replacement: wheel bearing – VAUXHALL Cavalier Mk2 Cabrio (J82). List of the tools you'll need:
All-purpose cleaning spray
Bearing grease
Ceramic grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Universal puller
Bush and bearing driver set
Ratchet wrench
Flat screwdriver
Hammer
Rubber mallet
Crow bar
Wheel chock
Buy tools
AUTODOC recommends:
  • Do not re-use the bearing assembly of your VAUXHALL Cavalier Mk2 Cabrio (J82) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – VAUXHALL Cavalier Mk2 Cabrio (J82) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on VAUXHALL Cavalier Mk2 Cabrio (J82) 1984 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the car.
    Replacement: wheel bearing – VAUXHALL Cavalier Mk2 Cabrio (J82). Professionals recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace VAUXHALL Cavalier Mk2 Convertible (J82) 1800i 1985 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VAUXHALL Cavalier Mk2 Cabrio (J82)
  3. Step 5
    VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i 1986 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1800i 1987 by yourself
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  5. Step 7
    How to remove VAUXHALL CAVALIER 1800i 1988 Wheel Bearing - online easy-to-follow instructions
    Remove the cotter pin securing the hub nut. Use a crowbar. Use a flat screwdriver.
  6. Step 8
    How to replace Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1984: download PDF manuals and video instructions
    Unscrew the hub nut. Use a drive socket #24. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i 1985 - download illustrated guide
    Remove the wheel bearing washer. Use a crowbar.
  8. Step 10
    Need to know how to renew Wheel Bearing on VAUXHALL CAVALIER 1986? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing. Use a crowbar.
  9. Step 11
    Changing of Wheel Bearing on VAUXHALL Cavalier Mk2 Cabrio (J82) 1987 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – VAUXHALL Cavalier Mk2 Cabrio (J82). Tip from AUTODOC:
    Examine the brake drum. Replace it if necessary.
  10. Step 12
    VAUXHALL CAVALIER 1800i Wheel Bearing replacement: online guides and video tutorials
    Remove the inner oil seal of the wheel bearing. Use a crowbar.
  11. Step 13
    Replacing Wheel Bearing on VAUXHALL Cavalier Mk2 Cabrio (J82) 1984 1800i by yourself
    Remove the wheel hub bearing. Use a crowbar.
  12. Step 14
    Cavalier Mk2 Convertible (J82) 1800i 1985 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat.
  13. Step 15
    How to change Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1986 - tips and tricks
    Remove the inner race of the wheel bearing from the brake drum. Use a universal puller.
  14. Step 16
    Step-by-step recommendations for DIY replacement VAUXHALL Cavalier Mk2 Cabrio (J82) 1987 1800i Wheel Bearing
    Remove the wheel bearing's outer race from the brake drum. Use a bush and bearing driver set.
  15. Step 17
    DIY replacement of Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1800i 1988 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  16. Step 18
    How to change Wheel Bearing on VAUXHALL Cavalier Mk2 Cabrio (J82) 1984 - free PDF and video manuals
    Install a new wheel bearing outer race in the brake drum. Bush and bearing driver set.
  17. Step 19
    How to replace VAUXHALL Cavalier Mk2 Convertible (J82) 1800i 1985 Wheel Bearing - step-by-step manuals and video guides
    Install the new inner race of the wheel bearing into the brake drum. Bush and bearing driver set.
  18. Step 20
    VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i 1986 Wheel Bearing replacement: free workshop manuals
    Treat the wheel hub bearing. Use bearing grease.
  19. Step 21
    Changing Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1800i 1987 by yourself
    Install a new hub bearing and secure it.
  20. Step 22
    How to remove VAUXHALL CAVALIER 1800i 1988 Wheel Bearing - online easy-to-follow instructions
    Install the wheel bearing oil seal.
  21. Step 23
    How to replace Wheel Bearing on VAUXHALL Cavalier Mk2 Convertible (J82) 1984: download PDF manuals and video instructions
    Treat the stub axle. Use all-purpose cleaning spray. Use bearing grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Cavalier Mk2 Convertible (J82) model.

VAUXHALL Cavalier Mk2 Cabrio (J82) tyre size

Popular maintenance tutorials for VAUXHALL Cavalier Mk2 Cabrio (J82)

More manuals for VAUXHALL Cavalier Mk2 Cabrio (J82)

Complete guides for changing the Wheel bearings on different VAUXHALL CAVALIER models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VAUXHALL Cavalier Mk2 Convertible (J82) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VAUXHALL Cavalier Mk2 Convertible (J82) Wheel Bearing replacement - online guide
Tips & tricks for your VAUXHALL Cavalier Mk2 Convertible (J82)
View more
  • How to change Wheel bearings on VAUXHALL Cavalier Mk2 Convertible (J82) 1800i - replacement tricks
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
    8K views
    Published on: 30/11/2023
  • Changing Hub bearing VAUXHALL Cavalier Mk2 Cabrio (J82) 1800i - Replacement Tips
    Top 5 mistakes when buying car parts
    4K views
    Published on: 10/03/2022
  • Maintenance Hacks - VAUXHALL Cavalier Mk2 Convertible (J82) 1800i Wheel bearing kit replacement guide
    What to do if your car heater isn't working | AUTODOC tips
    4K views
    Published on: 11/02/2021
  • Replace Wheel hub bearing on VAUXHALL Cavalier Mk2 Cabrio (J82) - free video tips
    How to restore a steering wheel | AUTODOC tips
    33K views
    Published on: 17/02/2022

Most commonly replaced car parts on VAUXHALL CAVALIER

Professional manuals for the most common VAUXHALL models