
Disclaimer
How to change rear wheel bearing on DACIA LOGAN (LS_) – replacement guide
downloads:
3
Views:
58
Important!
This replacement procedure can be used for:
DACIA LOGAN (LS_) 1.4 (LSOA, LSOC, LSOE, LSOG), DACIA LOGAN (LS_) 1.6 (LSOB, LSOD, LSOF, LSOH), DACIA LOGAN (LS_) 1.5 dCi (LS0J, LS0Y), DACIA LOGAN (LS_) 1.6 16V (LS09, LS0L, LS0M, LS0P, LS0V, LS18, LS1S, LS1V,..., DACIA LOGAN (LS_) 1.5 dCi (LS0K), DACIA LOGAN (LS_) 1.5 dCi (LS0W) … View more
The steps may slightly vary depending on the car design.
DACIA LOGAN (LS_) 1.4 (LSOA, LSOC, LSOE, LSOG), DACIA LOGAN (LS_) 1.6 (LSOB, LSOD, LSOF, LSOH), DACIA LOGAN (LS_) 1.5 dCi (LS0J, LS0Y), DACIA LOGAN (LS_) 1.6 16V (LS09, LS0L, LS0M, LS0P, LS0V, LS18, LS1S, LS1V,..., DACIA LOGAN (LS_) 1.5 dCi (LS0K), DACIA LOGAN (LS_) 1.5 dCi (LS0W) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for LOGAN (LS_) and other DACIA models
Wheel bearing kit
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – DACIA LOGAN (LS_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your DACIA LOGAN (LS_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – DACIA LOGAN (LS_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #19.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. DACIA LOGAN (LS_)
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – DACIA LOGAN (LS_). Professionals recommend:Some cars are not equipped with wheel hub caps.
- Step 8Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
- Step 9Remove the brake drum assembled with the wheel hub bearing.
- Step 10Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the DACIA Logan I Saloon (LS) model
Popular maintenance tutorials for Dacia Logan LS
Complete guides for changing the Wheel bearings on different DACIA LOGAN models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your DACIA LOGAN (LS_)
View more
- How to Fix P0401 ✅ error code Insufficient EGR flow
- How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
- DIY alternator repair | AUTODOC tips
- Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Most commonly replaced car parts on DACIA LOGAN
Time to replace parts? Get even better deals in our Shop app.

SCAN ME