Important!
This replacement procedure can be used for:
SKODA SUPERB (3T4) 2.0 TFSI, SKODA SUPERB (3T4) 1.6 TDI, SKODA SUPERB (3T4) 2.0 TDI 16V 4x4, SKODA SUPERB (3T4) 1.4 TSI, SKODA SUPERB (3T4) 1.8 TSI, SKODA SUPERB (3T4) 1.8 TSI 4x4, SKODA SUPERB (3T4) 1.9 TDI, SKODA SUPERB (3T4) 2.0 TDI, SKODA SUPERB (3T4) 2.0 TDI, SKODA SUPERB (3T4) 3.6 FSI 4x4, SKODA SUPERB (3T4) 2.0 TDI 4x4, SKODA SUPERB (3T4) 2.0 TDI 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for SUPERB (3T4) and other SKODA models
Alternative products
How to change Suspension arm on Skoda Superb 3t 2.0 TDI – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower trailing arm – SKODA SUPERB (3T4). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – SKODA SUPERB (3T4). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – SKODA SUPERB (3T4). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on Skoda Superb 3t 2008 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SKODA SUPERB (3T4) 2.0 TDI 2009 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Skoda Superb 3t 2.0 TDI 16V 2010 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – SKODA SUPERB (3T4). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on SKODA SUPERB (3T4) 1.9 TDI 2011 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SKODA SUPERB 1.6 TDI 2012 Control Arm - online easy-to-follow instructions
    Support the arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Control Arm on SKODA SUPERB (3T4) 2013: download PDF manuals and video instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on Skoda Superb 3t 1.4 TSI 2014 - download illustrated guide
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on SKODA SUPERB 2015? This free workshop manual will help you to do it yourself
    Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer.
  9. Step 10
    Changing of Control Arm on Skoda Superb 3t 2008 won't be an issue if you follow this illustrated step-by-step guide
    Undo the bracket attaching the parking brake cable to the trailing arm.
  10. Step 11
    SKODA SUPERB 2.0 TFSI Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on Skoda Superb 3t 2010 2.0 TDI by yourself
    Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    SUPERB (3T4) 1.6 TDI 2011 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on SKODA SUPERB (3T4) 2012 - tips and tricks
    Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Skoda Superb 3t 2013 1.6 TDI Control Arm
    Remove the bracket from the arm.
  15. Step 16
    DIY replacement of Control Arm on SKODA SUPERB (3T4) 1.8 TSI 2014 is not an issue anymore with our step-by-step tutorial
    Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  16. Step 17
    How to change Control Arm on Skoda Superb 3t 2008 - free PDF and video manuals
    Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Superb II Hatchback (3T4) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SKODA SUPERB (3T4) Control Arm replacement - online guide
Tips & tricks for your SKODA SUPERB (3T4)
View more
  • How to change Control arm on SKODA SUPERB (3T4) 1.8 TSI - replacement tricks
    Checking the starter without removing it | AUTODOC tips
  • Changing Wishbone Skoda Superb 3t 2.0 TDI - Replacement Tips
    Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
  • Maintenance Hacks - SKODA SUPERB (3T4) 2.0 TDI 16V Control arms replacement guide
    DIY rear axle restoration | Drivetrain restoration – Part 2
  • Replace Trailing arm on Skoda Superb 3t - free video tips
    5 causes of turbocharger failure and how to avoid them
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SKODA SUPERB (3T4) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME