Disclaimer
How to change rear strut mount on MINI Convertible (R52) – replacement guide
downloads:
1
Views:
16
Important!
This replacement procedure can be used for:
MINI Convertible (R52) Cooper S, MINI Convertible (R52) Cooper S, MINI Convertible (R52) Cooper, MINI Convertible (R52) One … View more
The steps may slightly vary depending on the car design.
MINI Convertible (R52) Cooper S, MINI Convertible (R52) Cooper S, MINI Convertible (R52) Cooper, MINI Convertible (R52) One … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Strut Mount for Convertible (R52) and other MINI models
Alternative products

Wire brush
WD-40 spray
Copper grease
Combination spanner #19
Drive socket # 13
Drive socket # 21
HEX bit No.H6.
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hydraulic transmission jack
Hydraulic strut spring compressor
Wheel chock
Replacement: strut mount – MINI MINI Convertible (R52). AUTODOC recommends:
- The replacement procedure is identical for the mounts of the left and right shock struts of the rear suspension.
- All mounts of the rear shock struts should be replaced simultaneously.
- Be sure to replace all self-locking nuts and bolts during installation.
- Please note: all work on the car – MINI MINI Convertible (R52) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: strut mount – MINI MINI Convertible (R52). Tip:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the shock strut fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the lower fastener of the shock absorber strut. Use a drive socket #21. Use a ratchet wrench. Use a tap wrench. - Step 8
Disconnect the wiring and the brake hose from the bracket on the shock strut. - Step 9
Unscrew the upper fastening of the shock absorber strut. Use a drive socket #13. Use a ratchet wrench.AUTODOC recommends:Important! Hold the suspension strut while unscrewing the fastening bolts. MINI MINI Convertible (R52) - Step 10
Remove the suspension strut. - Step 11
Set the shock absorber strut on the spring compressor tool.Replacement: strut mount – MINI MINI Convertible (R52). AUTODOC experts recommend:Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles. - Step 12
Compress the spring. - Step 13
Remove the strut piston rod nut. Use HEX No.H6. Use a combination spanner #19. Use a ratchet wrench. - Step 14
Remove the top mount. - Step 15
Install the top shock strut mount. - Step 16
Tighten the shock strut piston rod nut. Use HEX No.H6. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.Replacement: strut mount – MINI MINI Convertible (R52). Tip:Check to make sure the spring is positioned correctly. Avoid its misalignment. - Step 17
Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MINI Convertible (R52) model
Popular maintenance tutorials for Mini r52
Complete guides for changing the Strut mount on different MINI Cabrio models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MINI Convertible (R52)
View more
How to inspect and troubleshoot your car heater when it’s not working
Top 5 brake repair mistakes | AUTODOC tips
5 more brake repair mistakes | Stop making these brake repair mistakes
Kolbenschmidt plastic gauge overview
Most commonly replaced car parts on MINI Cabrio
Professional manuals for the most common MINI models
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























