When to replace the Brake Pad Wear Sensor on your BMW 3 SERIES
Recommended replacement interval for the part category Sensor, brake pad wear : 30000 km
Important!
This replacement procedure can be used for:
BMW 3 Coupe (E46) 323 Ci, BMW 3 Coupe (E46) 328 Ci, BMW 3 Coupe (E46) 320 Ci, BMW 3 Coupe (E46) 318 Ci, BMW 3 Coupe (E46) M3, BMW 3 Coupe (E46) 330 xi, BMW 3 Coupe (E46) 320 Ci, BMW 3 Coupe (E46) 325 Ci, BMW 3 Coupe (E46) 316 Ci, BMW 3 Coupe (E46) 318 Ci, BMW 3 Coupe (E46) 330 Cd, BMW 3 Coupe (E46) 320 Cd, BMW 3 Coupe (E46) M3 CSL, BMW 3 Coupe (E46) 316 Ci View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Pad Wear Sensor for 3 Coupe (E46) and other BMW models
Tools
Replacement: brake pad wear sensor – BMW 3 Coupe (E46). Tools you'll need:
Wire brush
Brake cleaner
Electronic spray
Copper grease
Torque wrench
Wheel impact socket #17
Round-nose pliers
Wheel chock
Replacement: brake pad wear sensor – BMW 3 Coupe (E46). AUTODOC experts recommend:
  • The replacement procedure is identical for both brake pad wear sensors on the same axle.
  • Please note: all work on the car – BMW 3 Coupe (E46) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    Secure the wheels with chocks.
    Step 3
    How to change Brake Pad Wear Sensor on E46 Coupe 1999 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 4
    Lift the car using a jack or place it over an inspection pit.
    Step 5
    How to replace BMW 3 Coupe (E46) 330 Ci 2000 Brake Pad Wear Sensor - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 3 Coupe (E46)
  3. Step 6
    E46 Coupe 320Ci 2.2 2001 Brake Pad Wear Sensor replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Brake Pad Wear Sensor on BMW 3 Coupe (E46) 323Ci 2.5 2002 by yourself
    Remove the brake pad wear sensor from the brake pad. Use round-nose pliers.
  5. Step 8
    Disconnect the brake pad wear sensor wire.
    Step 9
    How to remove BMW 3 SERIES 325 Ci 2003 Brake Pad Wear Sensor - online easy-to-follow instructions
    Open the cover of the wiring housing.
  6. Step 10
    How to replace Brake Pad Wear Sensor on BMW 3 Coupe (E46) 2004: download PDF manuals and video instructions
    Detach the connector of the brake pad wear sensor.
  7. Step 11
    How hard is it to do yourself: Brake Pad Wear Sensor replacement on E46 Coupe 328 Ci 2005 - download illustrated guide
    Install the wear sensor on the brake pads. Use round-nose pliers.
  8. Step 12
    Need to know how to renew Brake Pad Wear Sensor on BMW 3 SERIES 2006? This free workshop manual will help you to do it yourself
    Connect the brake pad wear sensor wire.
  9. Step 13
    Changing of Brake Pad Wear Sensor on E46 Coupe 1999 won't be an issue if you follow this illustrated step-by-step guide
    Treat the brake pad wear sensor plug. Use dielectric grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW 3 Coupe (E46) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW 3 Coupe (E46) Brake Pad Wear Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW 3 Coupe (E46) Brake Pad Wear Sensor replacement - online guide
Tips & tricks for your BMW 3 Coupe (E46)
View more
  • How to change Brake pad wear indicator on BMW 3 Coupe (E46) 330Cd 3.0 - replacement tricks
    What to do if the belt squeals | AUTODOC tips
  • Changing Brake pad sensor E46 Coupe 330 Ci - Replacement Tips
    3 things that cause engine damage | AUTODOC tips
  • Maintenance Hacks - BMW 3 Coupe (E46) 320Ci 2.2 Brake wear indicator replacement guide
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Replace Brake wear sensor on E46 Coupe - free video tips
    How to paint a brake caliper | AUTODOC tips