Important!
This replacement procedure can be used for:
BMW 3 Coupe (E92) 318 i, BMW 3 Coupe (E92) 335i, BMW 3 Coupe (E92) 335 d, BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 330 d, BMW 3 Coupe (E92) 325 xi, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 330 xd, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 330 xi, BMW 3 Coupe (E92) 320i, BMW 3 Coupe (E92) 320 d, BMW 3 Coupe (E92) 325 d, BMW 3 Coupe (E92) M3, BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 335 xi, BMW 3 Coupe (E92) 323i, BMW 3 Coupe (E92) 330d, BMW 3 Coupe (E92) 330 xd, BMW 3 Coupe (E92) 325i xDrive, BMW 3 Coupe (E92) 330 i xDrive, BMW 3 Coupe (E92) 335 i xDrive, BMW 3 Coupe (E92) 320d xDrive, BMW 3 Coupe (E92) 330 d xDrive, BMW 3 Coupe (E92) 320 d xDrive, BMW 3 Coupe (E92) 320 d, BMW 3 Coupe (E92) 325d, BMW 3 Coupe (E92) 320i, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 325 d, BMW 3 Coupe (E92) 325 i, BMW 3 Coupe (E92) 320 d, BMW 3 Coupe (E92) M3 GTS, BMW 3 Coupe (E92) 316i, BMW 3 Coupe (E92) 320 i, BMW 3 Coupe (E92) 328i, BMW 3 Coupe (E92) 330i, BMW 3 Coupe (E92) 325 i xDrive, BMW 3 Coupe (E92) 325i, BMW 3 Coupe (E92) 328i xDrive, BMW 3 Coupe (E92) 320 d, BMW 3 Coupe (E92) 320 d, BMW 3 Coupe (E92) 320d xDrive 2.0, BMW 3 Coupe (E92) 320d xDrive, BMW 3 Coupe (E92) 320d xDrive, BMW 3 Coupe (E92) 323 i, BMW 3 Coupe (E92) 335i, BMW 3 Coupe (E92) 335i xDrive 3.0 , BMW 3 Coupe (E92) 335 xi, BMW 3 Coupe (E92) 335i, BMW 3 Coupe (E92) 335i xDrive 3.0, BMW 3 Coupe (E92) 330xi 3.0, BMW 3 Coupe (E92) 325i xDrive, BMW 3 Coupe (E92) 325xi, BMW 3 Coupe (E92) 325i xDrive View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: anti roll bar links – BMW 3 Coupe (E92). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 13
Combination spanner #17
HEX bit No.H5.
Wheel impact socket #17
Ratchet wrench
Flat Screwdriver
Torque wrench
Wheel chock
AUTODOC recommends:
  • Replace the stabiliser links on BMW 3 Coupe (E92) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – BMW 3 Coupe (E92) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Anti Roll Bar Links on E92 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace BMW 3 Coupe (E92) 335i 2006 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    E92 320d 2.0 2007 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW 3 Coupe (E92)
  4. Step 5
    Changing Anti Roll Bar Links on BMW 3 Coupe (E92) 330d 3.0 2008 by yourself
    Remove the wheel.
  5. Step 6
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove BMW 3 SERIES 325i 2009 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on BMW 3 Coupe (E92) 2010: download PDF manuals and video instructions
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #13. Use a ratchet wrench. Use a flat screwdriver.
  7. Step 9
    Remove the fastening bolt.
    Step 10
    How hard is it to do yourself: Anti Roll Bar Links replacement on E92 320i 2011 - download illustrated guide
    Remove the stabilizer rod.
    Replacement: anti roll bar links – BMW 3 Coupe (E92). Tip from AUTODOC:
    Examine stabiliser bushes. Replace them if needed.
  8. Step 11
    Need to know how to renew Anti Roll Bar Links on BMW 3 SERIES 2012? This free workshop manual will help you to do it yourself
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  9. Step 12
    Changing of Anti Roll Bar Links on E92 2013 won't be an issue if you follow this illustrated step-by-step guide
    Ιnstall the transverse stabilizer link.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW 3 Coupe (E92) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW 3 Coupe (E92) Anti Roll Bar Links replacement - online guide
Tips & tricks for your BMW 3 Coupe (E92)
View more
  • How to change Drop links on BMW 3 Coupe (E92) 335d 3.0 - replacement tricks
    Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
  • Changing Stabilizer link E92 335i - Replacement Tips
    Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
  • Maintenance Hacks - BMW 3 Coupe (E92) 320d 2.0 Sway bar link replacement guide
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
  • Replace Drop link on E92 - free video tips
    How to repair a bumper yourself | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW 3 Coupe (E92) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME