Disclaimer
How to change pollen filter on ALPINA B8 Touring (E36) – replacement guide
downloads:
0
Views:
1
Recommended replacement interval for the part category Pollen filter : 15000 km
Important!
This replacement procedure can be used for:
ALPINA B8 Touring (E36) 4.6 … View more
The steps may slightly vary depending on the car design.
ALPINA B8 Touring (E36) 4.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Pollen Filter for B8 Touring (E36) and other ALPINA models
Alternative products

Phillips screwdriver
Flat screwdriver
Clip removal tool
Replacement: pollen filter – ALPINA B8 Touring (E36). Tip from AUTODOC experts:
- Replace the cabin filter at least once every six months, in early spring and autumn seasons.
- Follow the terms, recommendations and requirements of the part operation provided by the manufacturer.
- If the air flow into the cabin has sharply reduced, replace the filter before a scheduled maintenance.
- Please note: all work on the car – ALPINA B8 Touring (E36) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Move the passenger seat fully backwards.Step 2
Open the glove box. - Step 3
Unscrew the glove box fastening screws. Use a Phillips screwdriver. Use a flat screwdriver. - Step 4
Remove the air vent. - Step 5
Unscrew the glove box fastening screws. Use a Phillips screwdriver. Use a flat screwdriver. - Step 6
Unplug the glove box light connector. - Step 7
Remove the glovebox.Replacement: pollen filter – ALPINA B8 Touring (E36). Professionals recommend:Be careful to avoid damaging the glove compartment fasteners. - Step 8
Unplug the glove box light connector. - Step 9
Remove the fasteners of the air duct housing. Use a clip removal tool. - Step 10
Remove the air distribution housing assembly. - Step 11
Remove the bottom cover of the glove box. - Step 12
Remove the cabin filter housing cover. Use a Phillips screwdriver.AUTODOC recommends:Replacement: pollen filter – ALPINA B8 Touring (E36). To avoid damaging the part when removing it, do not use excessive force. - Step 13
Remove the cabin filter.Replacement: pollen filter – ALPINA B8 Touring (E36). AUTODOC experts recommend:Do not attempt to clean and reuse the filter - it will affect the quality of air cleaning inside the car. - Step 14
Install the cabin filter to its mounting seat. Make sure that the filter edge fits tight to the housing.Replacement: pollen filter – ALPINA B8 Touring (E36). Tip:Check out the correct location of the filter element. Do not skew.Follow the air flow direction arrow on the filter.Attention! Use quality filters – ALPINA B8 Touring (E36). - Step 15
Reinstall the cabin filter housing cover. Make sure you hear a click indicating that it is locked in place. Use a Phillips screwdriver.AUTODOC recommends:Replacement: pollen filter – ALPINA B8 Touring (E36). To avoid damaging the part during installation, do not use excessive force. - Step 16
Reinstall the air distribution housing assembly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALPINA B8 Touring (E36) model
Popular maintenance tutorials for ALPINA B8 Touring (E36)
Complete guides for changing the Pollen filter on different ALPINA B8 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALPINA B8 Touring (E36)
View more
#TPMS Explained: Why Your Light is On and How to Respond Safely
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
How to fix your car with AUTODOC CLUB
Top 5 brake repair mistakes | AUTODOC tips
Most commonly replaced car parts on ALPINA B8
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




















