
Disclaimer
How to change fuel filter on CITROËN Jumpy MPV (VF7) – replacement guide
downloads:
2
Views:
37

Recommended replacement interval for the part category Fuel filter : 60000 km
Important!
This replacement procedure can be used for:
CITROËN Jumpy MPV (VF7) 2.0 HDi, CITROËN Jumpy MPV (VF7) 2.0 HDi … View more
The steps may slightly vary depending on the car design.
CITROËN Jumpy MPV (VF7) 2.0 HDi, CITROËN Jumpy MPV (VF7) 2.0 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Fuel Filter for Jumpy MPV (VF7) and other CITROËN models
Fuel filter
Alternative products

All-purpose cleaning spray
Drive socket # 27
Ratchet wrench
Flat Screwdriver
Clip removal tool
Hand-operated fluid syringe
Fluid container
Fender cover
Replacement: fuel filter – CITROËN JUMPY. AUTODOC experts recommend:
- Ensure adequate ventilation of the workplace. Fuel vapors are poisonous.
- All work should be done with the engine stopped.
Replacement: fuel filter – CITROËN JUMPY. Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.AUTODOC recommends:Replacement: fuel filter – CITROËN JUMPY. To avoid damaging the part during installation, do not use excessive force.
- Step 4Clean the fasteners of the fuel supply lines. Use all-purpose cleaning spray.
- Step 5Detach the fuel pressure sensor connector. Use a flat screwdriver.
- Step 6Squeeze the clips and detach the fuel supply lines from the fuel filter housing. Use a flat screwdriver. Use a clip removal tool.Replacement: fuel filter – CITROËN JUMPY. Tip:Be careful! Fuel may leak from the filter housing and hoses.
- Step 7Close the fuel lines with caps.
- Step 8Unscrew the fasteners of the fuel filter housing cover. Use a drive socket #27. Use a ratchet wrench.
- Step 9Remove the fuel filter cover with the old filter cartridge attached.
- Step 10Prepare a container for fluids.Step 11Put the fuel filter cover with the old filter cartridge into a container.
- Step 12Pump the fuel out of the fuel filter housing. Use a hand-operated fluid syringe.
- Step 13Remove the old sealing ring. Use a flat screwdriver.
- Step 14Remove the fuel filter.
- Step 15Clean the fuel filter housing and the cover. Use all-purpose cleaning spray.
- Step 16Install the new sealing ring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Dispatch II MPV (VF7) model
Popular maintenance tutorials for CITROËN JUMPY
Complete guides for changing the Fuel filters on different CITROËN DISPATCH models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN Jumpy MPV (VF7)
View more
- How to tighten cylinder head bolts
- What to do if your check engine light is on | AUTODOC tips
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
Most commonly replaced car parts on CITROËN DISPATCH
Time to replace parts? Get even better deals in our Shop app.

SCAN ME