Important!
This replacement procedure can be used for:
SKODA Rapid Hatchback (NH3) 1.2, SKODA Rapid Hatchback (NH3) 1.2 TSI, SKODA Rapid Hatchback (NH3) 1.2 TSI, SKODA Rapid Hatchback (NH3) 1.4 TSI, SKODA Rapid Hatchback (NH3) 1.6 TDI, SKODA Rapid Hatchback (NH3) 1.6 TDI, SKODA Rapid Hatchback (NH3) 1.6, SKODA Rapid Hatchback (NH3) 1.2 TSI, SKODA Rapid Hatchback (NH3) 1.2 TSI, SKODA Rapid Hatchback (NH3) 1.4 TSI, SKODA Rapid Hatchback (NH3) 1.4 TDI, SKODA Rapid Hatchback (NH3) 1.6 TDI, SKODA Rapid Hatchback (NH3) 1.6, SKODA Rapid Hatchback (NH3) 1.0 TSI, SKODA Rapid Hatchback (NH3) 1.0 TSI, SKODA Rapid Hatchback (NH3) 1.6 SRE, SKODA Rapid Hatchback (NH3) 1.2 LPG View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Rapid Hatchback (NH3) and other SKODA models
Tools
Replacement: strut mount – SKODA RAPID (NH3). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #18
Drive socket # 16
Drive socket # 18
Drive socket # 20
Drive socket # 21
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Replacement: strut mount – SKODA RAPID (NH3). Tip from AUTODOC:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • Be sure to replace all self-locking nuts and bolts during installation.
  • Please note: all work on the car – SKODA RAPID (NH3) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Strut Mount on Skoda Rapid NH3 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace SKODA Rapid Hatchback (NH3) 1.6 TDI 2013 Strut Mount - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: strut mount – SKODA RAPID (NH3). AUTODOC experts recommend:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Skoda Rapid NH3 1.2 TSI 2014 Strut Mount replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    Changing Strut Mount on SKODA Rapid Hatchback (NH3) 1.4 TDI 2015 by yourself
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a drive socket #16. Use a ratchet wrench.
  5. Step 8
    Remove the fastening bolt.
    Step 9
    How to remove SKODA RAPID 1.6 TDI 2016 Strut Mount - online easy-to-follow instructions
    Disconnect the wiring from the bracket on the shock strut.
  6. Step 10
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 11
    How to replace Strut Mount on SKODA Rapid Hatchback (NH3) 2017: download PDF manuals and video instructions
    Unscrew the lower fastener connecting the shock strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  7. Step 12
    Remove the fastening bolt.
    Step 13
    How hard is it to do yourself: Strut Mount replacement on Skoda Rapid NH3 1.4 TSI 2018 - download illustrated guide
    Disconnect the steering knuckle from the shock absorber strut. Use a hammer.
  8. Step 14
    Lower the car.
    Step 15
    Open the hood.
    Step 16
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 17
    Clean the fasteners of the shock strut upper mount. Use WD-40 spray.
    Step 18
    Need to know how to renew Strut Mount on SKODA RAPID 2019? This free workshop manual will help you to do it yourself
    Unscrew the top fastening of the shock strut mount. Use a drive socket #21. Use a ratchet wrench.
    AUTODOC recommends:
    Important! Hold the suspension strut while unscrewing the fastening bolts. SKODA RAPID (NH3)
  9. Step 19
    Changing of Strut Mount on Skoda Rapid NH3 2020 won't be an issue if you follow this illustrated step-by-step guide
    Remove the suspension strut.
  10. Step 20
    SKODA RAPID 1.6 TDI Strut Mount replacement: online guides and video tutorials
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – SKODA RAPID (NH3). Tip:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  11. Step 21
    Replacing Strut Mount on Skoda Rapid NH3 2022 1.6 TDI by yourself
    Compress the spring.
  12. Step 22
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
    Step 23
    Rapid Hatchback (NH3) 1.6 TDI 2023 Strut Mount DIY replacement workshop manual
    Remove the strut piston rod nut. Use a drive socket #20. Use a ratchet wrench.
  13. Step 24
    How to change Strut Mount on SKODA Rapid Hatchback (NH3) 2024 - tips and tricks
    Remove the top strut mount.
    Replacement: strut mount – SKODA RAPID (NH3). Tip from AUTODOC experts:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  14. Step 25
    Clean the mounting seat of the shock strut mount. Use a wire brush. Use WD-40 spray.
    Step 26
    Step-by-step recommendations for DIY replacement Skoda Rapid NH3 2012 1.6 TDI Strut Mount
    Install a new strut mount.
  15. Step 27
    DIY replacement of Strut Mount on SKODA Rapid Hatchback (NH3) 1.4 TSI 2013 is not an issue anymore with our step-by-step tutorial
    Tighten the shock strut piston rod nut. Use a drive socket #20. Use a torque wrench. Tighten it to 60 Nm torque.
    Replacement: strut mount – SKODA RAPID (NH3). Professionals recommend:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  16. Step 28
    How to change Strut Mount on Skoda Rapid NH3 2012 - free PDF and video manuals
    Decompress the spring.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the SKODA Rapid Hatchback (NH3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SKODA Rapid Hatchback (NH3) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SKODA Rapid Hatchback (NH3) Strut Mount replacement - online guide
Tips & tricks for your SKODA Rapid Hatchback (NH3)
View more
  • How to change Strut mount on SKODA Rapid Hatchback (NH3) 1.4 TSI - replacement tricks
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Changing Top mount Skoda Rapid NH3 1.6 TDI - Replacement Tips
    How to unlock your car without a key | AUTODOC tips
  • Maintenance Hacks - SKODA Rapid Hatchback (NH3) 1.2 TSI Top strut mount replacement guide
    DIY car soundproofing | AUTODOC tips
  • Replace Top mounts on Skoda Rapid NH3 - free video tips
    How to detect vacuum leaks using a smoke machine | AUTODOC