Important!
This replacement procedure can be used for:
BMW Z3 Roadster (E36) 2.2 i, BMW Z3 Roadster (E36) 3.0 i, BMW Z3 Roadster (E36) 1.9 i, BMW Z3 Roadster (E36) 2.0 i, BMW Z3 Roadster (E36) 1.9 i, BMW Z3 Roadster (E36) 2.8 i, BMW Z3 Roadster (E36) 1.8 i, BMW Z3 Roadster (E36) 1.9 i View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Strut Mount for Z3 Roadster (E36) and other BMW models
Tools
Replacement: strut mount – BMW Z3 (E36). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 9
Drive socket # 13
Drive socket # 18
Drive socket # 19
Drive socket # 22
Wheel impact socket #17
Ratchet wrench
Crow bar
Hydraulic strut spring compressor
Hydraulic transmission jack
Fender cover
Wheel chock
Replacement: strut mount – BMW Z3 (E36). Tip from AUTODOC:
  • The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
  • All mounts of the front shock struts should be replaced simultaneously.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to change Strut Mount on BMW Z3 Roadster 1995 - free PDF and video manuals
    Clean the fasteners of the shock strut upper mount. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace BMW Z3 Roadster (E36) 1.8 i 1996 Strut Mount - step-by-step manuals and video guides
    Loosen the upper fasteners of the suspension strut. Use a drive socket #13. Use a ratchet wrench.
  3. Step 6
    BMW Z3 Roadster 1.9 i 1997 Strut Mount replacement: free workshop manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  4. Step 7
    Raise the front of the car and secure on supports.
    Step 8
    Changing Strut Mount on BMW Z3 Roadster (E36) 2.0 i 1998 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW Z3 (E36)
  5. Step 9
    How to remove BMW Z3 3.0 i 1999 Strut Mount - online easy-to-follow instructions
    Remove the wheel.
  6. Step 10
    How to replace Strut Mount on BMW Z3 Roadster (E36) 2000: download PDF manuals and video instructions
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
  7. Step 11
    How hard is it to do yourself: Strut Mount replacement on BMW Z3 Roadster M 3.2 2001 - download illustrated guide
    Unscrew the fasteners connecting the suspension strut to the steering knuckle. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  8. Step 12
    Need to know how to renew Strut Mount on BMW Z3 2002? This free workshop manual will help you to do it yourself
    Detach the brake hose from the shock strut.
  9. Step 13
    Changing of Strut Mount on BMW Z3 Roadster 2003 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the ABS sensor wiring.
  10. Step 14
    BMW Z3 1.9 i Strut Mount replacement: online guides and video tutorials
    Prop up the steering knuckle. Use a hydraulic transmission jack.
  11. Step 15
    Replacing Strut Mount on BMW Z3 Roadster 1996 1.8 i by yourself
    Remove the fastening bolts.
  12. Step 16
    Z3 Roadster (E36) 3.0 i 1997 Strut Mount DIY replacement workshop manual
    Disconnect the steering knuckle from the shock absorber strut.
  13. Step 17
    How to change Strut Mount on BMW Z3 Roadster (E36) 1998 - tips and tricks
    Unscrew the upper fasteners of the shock strut.
    AUTODOC recommends:
    BMW Z3 (E36) – To avoid injury, hold the suspension strut while unscrewing the fastening bolts.
  14. Step 18
    Step-by-step recommendations for DIY replacement BMW Z3 Roadster 1999 3.0 i Strut Mount
    Remove the suspension strut.
  15. Step 19
    DIY replacement of Strut Mount on BMW Z3 Roadster (E36) 2.8 i 2000 is not an issue anymore with our step-by-step tutorial
    Set the shock absorber strut on the spring compressor tool.
    Replacement: strut mount – BMW Z3 (E36). Professionals recommend:
    Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles.
  16. Step 20
    How to change Strut Mount on BMW Z3 Roadster 1995 - free PDF and video manuals
    Compress the spring.
  17. Step 21
    How to replace BMW Z3 Roadster (E36) 1.8 i 1996 Strut Mount - step-by-step manuals and video guides
    Remove the shock strut mount cap. Use a crowbar.
  18. Step 22
    BMW Z3 Roadster 1.9 i 1997 Strut Mount replacement: free workshop manuals
    Treat the shock strut rod. Use a wire brush. Use WD-40 spray.
  19. Step 23
    Changing Strut Mount on BMW Z3 Roadster (E36) 2.0 i 1998 by yourself
    Remove the strut piston rod nut. Use a drive socket #9. Use a drive socket #22. Use a ratchet wrench.
  20. Step 24
    How to remove BMW Z3 3.0 i 1999 Strut Mount - online easy-to-follow instructions
    Remove the shock absorber mount, boot and bump stop.
    Replacement: strut mount – BMW Z3 (E36). AUTODOC experts recommend:
    Examine the shock absorber dust cap and the bump stop. Replace them if necessary.
  21. Step 25
    How to replace Strut Mount on BMW Z3 Roadster (E36) 2000: download PDF manuals and video instructions
    Install the boot and a bump stop onto the shock absorber.
  22. Step 26
    How hard is it to do yourself: Strut Mount replacement on BMW Z3 Roadster M 3.2 2001 - download illustrated guide
    Install a new top shock strut mount.
  23. Step 27
    Need to know how to renew Strut Mount on BMW Z3 2002? This free workshop manual will help you to do it yourself
    Tighten the shock strut piston rod nut. Use a drive socket #19. Use a drive socket #9. Use a torque wrench. Tighten it to 52 Nm torque.
    Replacement: strut mount – BMW Z3 (E36). Tip from AUTODOC experts:
    Check to make sure the spring is positioned correctly. Avoid its misalignment.
  24. Step 28
    Changing of Strut Mount on BMW Z3 Roadster 2003 won't be an issue if you follow this illustrated step-by-step guide
    Treat the shock strut rod. Use copper grease.
  25. Step 29
    BMW Z3 1.9 i Strut Mount replacement: online guides and video tutorials
    Install the shock strut mount cap.
  26. Step 30
    Replacing Strut Mount on BMW Z3 Roadster 1996 1.8 i by yourself
    Decompress the spring.
  27. Step 31
    Z3 Roadster (E36) 3.0 i 1997 Strut Mount DIY replacement workshop manual
    Remove the assembled shock strut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the BMW Z3 Roadster (E36) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
BMW Z3 Roadster (E36) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY BMW Z3 Roadster (E36) Strut Mount replacement - online guide
Tips & tricks for your BMW Z3 Roadster (E36)
View more
  • How to change Strut mount on BMW Z3 Roadster (E36) 2.8 i - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Top mount BMW Z3 Roadster 1.8 i - Replacement Tips
    Coolant comparison test | AUTODOC
  • Maintenance Hacks - BMW Z3 Roadster (E36) 1.9 i Top strut mount replacement guide
    How to Make a DIY Foam Sprayer | AUTODOC tips
  • Replace Top mounts on BMW Z3 Roadster - free video tips
    DIY valve cover restoration | AUTODOC tips