Disclaimer
How to change front anti roll bar links on CITROËN C5 I Break (DE_) – replacement guide
downloads:
1
Views:
19
Important!
This replacement procedure can be used for:
CITROËN C5 I Break (DE_) 2.0 16V (DERFNF, DERFNC, RERFNC), CITROËN C5 I Break (DE_) 2.0 16V HPi (DERLZB), CITROËN C5 I Break (DE_) 3.0 V6 (DEXFXC, DEXFXF), CITROËN C5 I Break (DE_) 2.0 HDi (DERHSB, DERHSE), CITROËN C5 I Break (DE_) 2.2 HDi (DE4HXB, DE4HXE), CITROËN C5 I Break (DE_) 1.8 16V (DE6FZB, DE6FZE), CITROËN C5 I Break (DE_) 3.0 Carlsson, CITROËN C5 I Break (DE_) 2.0 HDi (DERHYB), CITROËN C5 I Break (DE_) 2.0 HDi (DERHZB, DERHZE) … View more
The steps may slightly vary depending on the car design.
CITROËN C5 I Break (DE_) 2.0 16V (DERFNF, DERFNC, RERFNC), CITROËN C5 I Break (DE_) 2.0 16V HPi (DERLZB), CITROËN C5 I Break (DE_) 3.0 V6 (DEXFXC, DEXFXF), CITROËN C5 I Break (DE_) 2.0 HDi (DERHSB, DERHSE), CITROËN C5 I Break (DE_) 2.2 HDi (DE4HXB, DE4HXE), CITROËN C5 I Break (DE_) 1.8 16V (DE6FZB, DE6FZE), CITROËN C5 I Break (DE_) 3.0 Carlsson, CITROËN C5 I Break (DE_) 2.0 HDi (DERHYB), CITROËN C5 I Break (DE_) 2.0 HDi (DERHZB, DERHZE) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for C5 I Break (DE_) and other CITROËN models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Combination spanner #18
Combination spanner #19
HEX bit No.H6.
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on CITROËN C5 I Break (DE_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – CITROËN C5 I Break (DE_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. CITROËN C5 I Break (DE_) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #18. Use HEX No.H6. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use HEX No.H6. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – CITROËN C5 I Break (DE_). AUTODOC experts recommend:Examine stabiliser bushes. Replace them if needed. - Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C5 I Estate model
Popular maintenance tutorials for Citroën C5 1 Estate
Complete guides for changing the Drop links on different CITROËN C5 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C5 I Break (DE_)
View more
5 signs of a faulty strut mount and how to fix it
CHECK ENGINE light turned on – step-by-step guide on what to do
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Most commonly replaced car parts on CITROËN C5
Time to replace parts? Get even better deals in our Shop app.

SCAN ME




























