How to carry out replacement: Anti Roll Bar Links 2.8i BMW Z3 Coupe
Disclaimer
Change BMW Z3 Coupe 2.8i Anti Roll Bar Links yourself – manuals and video tutorials

How to change front anti roll bar links on BMW Z3 Coupe (E36) – replacement guide

downloads: 0
Views: 18
Download your free tutorial and fix BMW Z3 Coupe (E36) M problems yourself Download for free 1.55 MB Anti Roll Bar Links for BMW Z3 Coupe Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
BMW Z3 Coupe (E36) 3.0i, BMW Z3 Coupe (E36) 2.8i … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Z3 Coupe (E36) and other BMW models
Alternative products
How to change Anti-roll bar link on BMW Z3 Coupe 2.8i – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – BMW Z3 Coupe (E36). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Combination spanner #16
Combination spanner #17
Drive socket # 13
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Hydraulic transmission jack
Wheel chock
Buy tools
AUTODOC recommends:
  • Replace the stabiliser links on BMW Z3 Coupe (E36) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • Please note: all work on the car – BMW Z3 Coupe (E36) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Anti Roll Bar Links on BMW Z3 Coupe 1997 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    How to replace BMW Z3 Coupe (E36) 2.8i 1998 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. BMW Z3 Coupe (E36)
  3. Step 5
    BMW Z3 Coupe 3.0i 1999 Anti Roll Bar Links replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Anti Roll Bar Links on BMW Z3 Coupe (E36) M 2000 by yourself
    Clean all joints of the stabiliser link. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove BMW Z3 2.8i 2001 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
  6. Step 8
    How to replace Anti Roll Bar Links on BMW Z3 Coupe (E36) 2002: download PDF manuals and video instructions
    Remove the fastening bolt.
  7. Step 9
    How hard is it to do yourself: Anti Roll Bar Links replacement on BMW Z3 Coupe M3.2 2003 - download illustrated guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Anti Roll Bar Links on BMW Z3 1997? This free workshop manual will help you to do it yourself
    Remove the stabilizer rod.
    Replacement: anti roll bar links – BMW Z3 Coupe (E36). AUTODOC experts recommend:
    Examine the stabiliser bushes. Replace them if necessary.
  9. Step 11
    Changing of Anti Roll Bar Links on BMW Z3 Coupe 1998 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
  10. Step 12
    BMW Z3 2.8i Anti Roll Bar Links replacement: online guides and video tutorials
    Ιnstall the transverse stabilizer link.
  11. Step 13
    Install the fastening bolt.
    Step 14
    Replacing Anti Roll Bar Links on BMW Z3 Coupe 2000 2.8i by yourself
    Tighten the stabiliser link fastener. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  12. Step 15
    Z3 Coupe (E36) 2.8i 2001 Anti Roll Bar Links DIY replacement workshop manual
    Support the arm. Use a hydraulic transmission jack.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the BMW Z3 Coupe (E36) model

BMW Z3 Coupe tyre size

Popular maintenance tutorials for BMW Z3 Coupe

More manuals for BMW Z3 Coupe

Complete guides for changing the Drop links on different BMW Z3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY BMW Z3 Coupe (E36) Anti Roll Bar Links replacement - online guide
Tips & tricks for your BMW Z3 Coupe (E36)
View more
  • How to change Drop links on BMW Z3 Coupe (E36) M3.2 - replacement tricks
    DIY alternator repair | AUTODOC tips
    2M views
    Published on: 30/11/2022
  • Changing Stabilizer link BMW Z3 Coupe 2.8i - Replacement Tips
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
    37K views
    Published on: 13/07/2023
  • Maintenance Hacks - BMW Z3 Coupe (E36) 3.0i Sway bar link replacement guide
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
    2K views
    Published on: 04/03/2021
  • Replace Drop link on BMW Z3 Coupe - free video tips
    TOP 5 mistakes during DIY oil change | AUTODOC tips
    37K views
    Published on: 17/06/2021

Most commonly replaced car parts on BMW Z3

Professional manuals for the most common BMW models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
BMW Z3 Coupe (E36) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME