
Disclaimer
How to change front ABS sensor on SEAT LEON ST Box Body / Estate (5F8) – replacement guide
downloads:
2
Views:
40
Important!
This replacement procedure can be used for:
SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive … View more
The steps may slightly vary depending on the car design.
SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive, SEAT LEON ST Box Body / Estate (5F8) 2.0 TDI 4Drive … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for LEON ST Box Body / Estate (5F8) and other SEAT models
ABS sensor
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Electronic spray
Multipurpose grease
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Flat screwdriver
Wheel chock
Replacement: ABS sensor – SEAT LEON ST Box Body / Estate (5F8). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – SEAT LEON ST Box Body / Estate (5F8). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the front of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT LEON ST Box Body / Estate (5F8)
- Step 5Remove the wheel.
- Step 6Detach the ABS sensor connector.
- Step 7Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 9Disconnect the ABS sensor.
- Step 10Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
- Step 11Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver.
- Step 12Connect the ABS sensor.
- Step 13Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the SEAT Leon ST Box Body / Estate (5F8) model
Popular maintenance tutorials for Seat Leon 3 ST
Complete guides for changing the Wheel speed sensor on different SEAT LEON models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your SEAT LEON ST Box Body / Estate (5F8)
View more
- DIY jack restoration | AUTODOC tips
- DIY manual gearbox restoration | Drivetrain restoration – Part 3
- Initial Car Inspection: What to Check Before You Buy
- Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on SEAT LEON
Time to replace parts? Get even better deals in our Shop app.

SCAN ME