How to change front ABS sensor on PORSCHE Carrera GT (980) – replacement guide
PORSCHE Carrera GT (980) 5.7 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- All work should be done with the engine stopped.
- Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3
Raise the front of the car and secure on supports.
Step 4
Unscrew the wheel bolts.
AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PORSCHE CARRERA GT
- Step 5

Remove the wheel.
- Step 6

Detach the ABS sensor connector.
- Step 7

Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray.
- Step 8

Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 9

Disconnect the ABS sensor.
- Step 10

Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
- Step 11

Treat the ABS sensor fastener. Use a multipurpose grease. Use a flat screwdriver.
- Step 12

Connect the ABS sensor.
- Step 13

Tighten the fastener that connects the ABS sensor to the steering knuckle. Use HEX No.H5. Use a torque wrench. Tighten it to 7 Nm torque.
Find out which tyre and wheel sizes are compatible with the PORSCHE Carrera GT (980) model
Popular maintenance tutorials for PORSCHE CARRERA GT
Complete guides for changing the Wheel speed sensor on different PORSCHE CARRERA GT models
Track expenses, manage logs, schedule replacements, and more.
Coolant comparison test | AUTODOC
How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
How to adjust the handbrake
Three ways to change oil without a lift
Most commonly replaced car parts on PORSCHE CARRERA GT





















