Disclaimer
How to change engine oil and filter on INFINITI M (Y51) – replacement guide
downloads:
1
Views:
11
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
INFINITI M (Y51) 37 … View more
The steps may slightly vary depending on the car design.
INFINITI M (Y51) 37 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for M (Y51) and other INFINITI models
Alternative products

Impact socket №19
Impact socket №10
Combination spanner №19
Oil filter cup socket 65/67-14f
Torque wrench
Oil drain pan
Funnel
Flat screwdriver
Replacement: engine oil and filter – INFINITI M (Y51). AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- All work should be done with the engine stopped.
- Wear gloves to prevent contact with hot liquid.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2
Remove the oil filler cap. - Step 3
Pour the engine flush in. - Step 4
Install the oil filler cap. - Step 5Start the engine, let it run for 15 minutes, and then stop it.Step 6Lift the car using a jack or place it over an inspection pit.AUTODOC recommends:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Step 7
Undo the fasteners of the oil pan lower cover. - Step 8
Remove the oil pan cover. Use a drive socket #10. Use a flat screwdriver. - Step 9Put a waste oil container with at least 5 l capacity under the drainage hole.Step 10
Unscrew the drain plug. Use a drive socket no.19 Or ring spanner no.19. - Step 11
Drain the used oil.Replacement: engine oil and filter – INFINITI M (Y51). Professionals recommend:Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole. - Step 12Move the container under the oil filter.Step 13
Unscrew the oil filter. Use the 65/67-14f socket. - Step 14
Remove the oil filter. Prepare a container for the old oil filter. Put the old oil filter in the container.AUTODOC recommends:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter. - Step 15
Clean the oil filter seat. - Step 16
Clean the area of the oil pan drainage hole.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the INFINITI M Saloon (Y51) model
Popular maintenance tutorials for Infiniti M Y51
Complete guides for changing the Oil filters on different INFINITI M models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your INFINITI M (Y51)
View more
Which Coolant is Best? Comparison Test | AUTODOC
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
When, why, and how to change engine oil | AUTODOC tips
5 causes of turbocharger failure and how to avoid them
Most commonly replaced car parts on INFINITI M
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























