
Disclaimer
How to change engine oil and filter on CITROËN Jumpy MPV (V_) – replacement guide
downloads:
1
Views:
17

Recommended replacement interval for the part category Oil filter : 1 year / 30000 km
Important!
This replacement procedure can be used for:
CITROËN Jumpy MPV (V_) 2.0 BlueHDi, CITROËN Jumpy MPV (V_) 2.0 BlueHDi … View more
The steps may slightly vary depending on the car design.
CITROËN Jumpy MPV (V_) 2.0 BlueHDi, CITROËN Jumpy MPV (V_) 2.0 BlueHDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for Jumpy MPV (V_) and other CITROËN models
Oil filter
Alternative products

Wire brush
All-purpose cleaning spray
Oil filter cup socket 74/76-15F
Drive socket # 21
Ratchet wrench
Torque wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – CITROËN JUMPY. Tip from AUTODOC:
- Replace the oil filter every time when changing motor oil.
- All work should be done with the engine stopped.
- Wear gloves to prevent contact with hot liquid.
Replacement: engine oil and filter – CITROËN JUMPY. Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the oil filler plug.
- Step 4Unscrew the oil filter. Use the 74/76-15F socket.
- Step 5Prepare a container for the old oil filter. Put the old oil filter in the container.Replacement: engine oil and filter – CITROËN JUMPY. AUTODOC experts recommend:Move up the container. The oil starts to drain out of the drainage hole immediately after you have removed the oil filter.Step 6Lift the car using a jack or place it over an inspection pit.Replacement: engine oil and filter – CITROËN JUMPY. AUTODOC recommends:The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.All work should be done with the engine stopped.Step 7Put a waste oil container with at least 5 l capacity under the drainage hole.
- Step 8Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray.
- Step 9Unscrew the drain plug. Use a drive socket #21. Use a ratchet wrench.
- Step 10Drain the used oil.Replacement: engine oil and filter – CITROËN JUMPY. Professionals recommend:Caution! The oil may be hot.
- Step 11Wait until the oil has completely drained from the drainage hole.Step 12Clean the area of the oil pan drainage hole.
- Step 13Screw in the new drainage plug and tighten it. Use a drive socket #21. Use a torque wrench. Tighten it to 34 Nm torque.
- Step 14Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Dispatch III MPV (V) model
Popular maintenance tutorials for CITROËN JUMPY
Complete guides for changing the Oil filters on different CITROËN DISPATCH models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN Jumpy MPV (V_)
View more
- Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
- Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
- Checking the starter without removing it | AUTODOC tips
- What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on CITROËN DISPATCH
Time to replace parts? Get even better deals in our Shop app.

SCAN ME