Disclaimer
How to change engine oil and filter on BMW 3 Compact (E36) – replacement guide
downloads:
6
Views:
104
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
BMW 3 Compact (E36) 323 ti, BMW 3 Compact (E36) 323ti … View more
The steps may slightly vary depending on the car design.
BMW 3 Compact (E36) 323 ti, BMW 3 Compact (E36) 323ti … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Oil Filter for 3 Compact (E36) and other BMW models
Alternative products

Wire brush
All-purpose cleaning spray
Torque wrench
Drive socket # 19
Drive socket # 36
Flat screwdriver
Ratchet wrench
Oil drain pan
Funnel
Fender cover
Replacement: engine oil and filter – BMW 3 Compact (E36). AUTODOC experts recommend:
- Replace the oil filter every time when changing motor oil.
- Wear gloves to prevent contact with hot liquid.
- Please note: all work on the car – BMW 3 Compact (E36) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the oil filler plug. - Step 4
Pull up the oil dipstick. - Step 5
Clean the oil filter housing cap. Use all-purpose cleaning spray. - Step 6
Unscrew the filter housing cap together with the old filter element. Use a drive socket #36. Use a ratchet wrench. - Step 7
Put the old oil filter in the container. - Step 8Lift the car using a jack or place it over an inspection pit.Step 9
Put a waste oil container with at least 7 l capacity under the drainage hole. - Step 10
Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray. - Step 11
Unscrew the drain plug. Use a drive socket #19. Use a ratchet wrench. - Step 12
Drain the used oil.Replacement: engine oil and filter – BMW 3 Compact (E36). Tip:Caution! The oil may be hot. - Step 13
Remove the oil filter cover O-ring. Use a flat screwdriver. - Step 14
Clean the oil filter housing cap. Use all-purpose cleaning spray. - Step 15
Install a new O-ring to its mounting seat on the filter cover. - Step 16
Install the new oil filter to the mounting seat on the filter cover. - Step 17
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray. - Step 18
Screw in the new drainage plug and tighten it. Use a drive socket #19. Use a torque wrench. Tighten it to 25 Nm torque. - Step 19
Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the BMW 3 Compact (E36) model
Popular maintenance tutorials for BMW E36 Compact
Complete guides for changing the Oil filters on different BMW 3 SERIES models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your BMW 3 Compact (E36)
View more
Top 5 possible reasons your car is shaking or vibrating
Checking the starter without removing it | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
How to Fix P0401 ✅ error code Insufficient EGR flow
Most commonly replaced car parts on BMW 3 SERIES
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























