Important!
This replacement procedure can be used for:
PEUGEOT 206 Hatchback (2A/C) 1.6 16V, PEUGEOT 206 CC (2D) 1.6 16V, PEUGEOT 307 (3A/C) 1.6 16V, PEUGEOT 307 SW (3H) 1.6 16V, PEUGEOT 206 SW (2E/K) 1.6 16V, PEUGEOT 307 CC (3B) 1.6 16V, PEUGEOT 307 Break (3E) 1.6 16V, PEUGEOT 206 Saloon 1.6 16V

The steps may slightly vary depending on the car design.

How to replace track rod end / tie rod end on PEUGEOT 206 1 (2D) [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #20
Combination spanner #22
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Tap wrench
Hammer
Pin punch
Wheel chock
AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Track Rod End on Peugeot 206 cc 2d 1998 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace PEUGEOT 206 CC (2D) 1.6 16V 1999 Track Rod End - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #19.
  3. Peugeot 206 cc 2d 2.0 S16 2000 Track Rod End replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Track Rod End on PEUGEOT 206 CC (2D) 1.6 2001 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove PEUGEOT 206 1.6 16V 2002 Track Rod End - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Track Rod End on PEUGEOT 206 CC (2D) 2003: download PDF manuals and video instructions
    Step 6
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  7. How hard is it to do yourself: Track Rod End replacement on Peugeot 206 cc 2d 1.6 HDi 110 2004 - download illustrated guide
    Step 7
    Loosen the lock nut securing the tie rod end to the tie rod.Use a combination spanner #22.
  8. Need to know how to renew Track Rod End on PEUGEOT 206 ? This free workshop manual will help you to do it yourself
    Step 8
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush.Use WD-40 spray.
  9. Changing of Track Rod End on Peugeot 206 cc 2d 2006 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #17.Use a tap wrench.
  10. PEUGEOT 206 1.6 16V Track Rod End replacement: online guides and video tutorials
    Step 10
    Disconnect the tie rod end from the steering knuckle.Use a pin punch.Use a hammer.
  11. Replacing Track Rod End on Peugeot 206 cc 2d 2008 1.6 16V by yourself
    Step 11
    Screw the end out of the tie rod.
  12. 206 CC (2D) 1.6 16V 2009 Track Rod End DIY replacement workshop manual
    Step 12
    Clean the mounting seats of the tie rod end.Use a wire brush.Use WD-40 spray.
  13. How to change Track Rod End on PEUGEOT 206 CC (2D) 2010 - tips and tricks
    Step 13
    Screw on a new tie rod end.
    AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements
  14. Step-by-step recommendations for DIY replacement Peugeot 206 cc 2d 2011 1.6 16V Track Rod End
    Step 14
    Connect the tie rod end to the steering knuckle.
  15. DIY replacement of Track Rod End on PEUGEOT 206 CC (2D) 1.6 HDi 110 2012 is not an issue anymore with our step-by-step tutorial
    Step 15
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  16. How to change Track Rod End on Peugeot 206 cc 2d 1998 - free PDF and video manuals
    Step 16
    Treat the threaded part of the tie rod. Use copper grease.
    Step 17
    Screw on the fastening nut that connects the tie rod end to the steering knuckle.Use a drive socket #17.Use a ratchet wrench.
  17. How to replace PEUGEOT 206 CC (2D) 1.6 16V 1999 Track Rod End - step-by-step manuals and video guides
    Step 18
    Tighten the tie rod end locknut.Use a combination spanner #20.Use a combination spanner #22.Use a torque wrench.Tighten it to 55 nm torque.
  18. Peugeot 206 cc 2d 2.0 S16 2000 Track Rod End replacement: free workshop manuals
    Step 19
    Tighten the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #17.Use a torque wrench.Tighten it to 70 nm torque.
  19. Changing Track Rod End on PEUGEOT 206 CC (2D) 1.6 2001 by yourself
    Step 20
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
  20. How to remove PEUGEOT 206 1.6 16V 2002 Track Rod End - online easy-to-follow instructions
    Step 21
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  21. How to replace Track Rod End on PEUGEOT 206 CC (2D) 2003: download PDF manuals and video instructions
    Step 22
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  22. How hard is it to do yourself: Track Rod End replacement on Peugeot 206 cc 2d 1.6 HDi 110 2004 - download illustrated guide
    Step 23
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  23. Need to know how to renew Track Rod End on PEUGEOT 206 ? This free workshop manual will help you to do it yourself
    Step 24
    Screw in the wheel bolts.Use wheel impact socket #19.
  24. Changing of Track Rod End on Peugeot 206 cc 2d 2006 won't be an issue if you follow this illustrated step-by-step guide
    Step 25
    Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 nm torque.
    AUTODOC recommends:
    Check and adjust wheel alignment if necessary.
  25. PEUGEOT 206 1.6 16V Track Rod End replacement: online guides and video tutorials
    Step 26
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
PEUGEOT 206 CC (2D) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 206 CC (2D) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 206 CC (2D)
View more
  • PEUGEOT 206 CC (2D) free video instructions: How to remove a rounded-off bolt without welding | AUTODOC tips
    How to remove a rounded-off bolt without welding | AUTODOC tips
  • PEUGEOT 206 CC (2D) free video instructions: Noise from under the bonnet that shouldn’t be ignored | AUTODOC
    Noise from under the bonnet that shouldn’t be ignored | AUTODOC
  • PEUGEOT 206 CC (2D) free video instructions: How to fix a knocking and creaking suspension | AUTODOC
    How to fix a knocking and creaking suspension | AUTODOC
  • PEUGEOT 206 CC (2D) free video instructions: How to check the engine cooling fan | AUTODOC tips
    How to check the engine cooling fan | AUTODOC tips

Manuals for PEUGEOT models