Important!
This replacement procedure can be used for:
PEUGEOT 107 Hatchback (PM_, PN_) 1.0

The steps may slightly vary depending on the car design.

How to replace tie rod end / track rod end on PEUGEOT 107 1 (PM, PN) [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Flat Screwdriver
Nippers
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Track Rod End on PEUGEOT 107 2005 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2006 Track Rod End - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. PEUGEOT 107 1.4 HDi 2007 Track Rod End replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove PEUGEOT 107 1.0 2009 Track Rod End - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 6
    Remove the cotter pin fixing the tie rod end fastening.Use a crowbar. Use a flat screwdriver.Use nippers.
  7. How hard is it to do yourself: Track Rod End replacement on PEUGEOT 107 1.0 2011 - download illustrated guide
    Step 7
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush.Use WD-40 spray.
  8. Need to know how to renew Track Rod End on PEUGEOT 107 ? This free workshop manual will help you to do it yourself
    Step 8
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  9. Changing of Track Rod End on PEUGEOT 107 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Loosen the lock nut securing the tie rod end to the tie rod.Use a combination spanner #17.
  10. PEUGEOT 107 1.0 Track Rod End replacement: online guides and video tutorials
    Step 10
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #17.Use a tap wrench.
  11. Replacing Track Rod End on PEUGEOT 107 2005 1.0 by yourself
    Step 11
    Disconnect the tie rod end from the steering knuckle.Use a ball joint puller.
  12. 107 Hatchback (PM_, PN_) 1.0 2006 Track Rod End DIY replacement workshop manual
    Step 12
    Screw the end out of the tie rod.
  13. How to change Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 2007 - tips and tricks
    Step 13
    Clean the mounting seats of the tie rod end.Use a wire brush.Use WD-40 spray.
  14. Step-by-step recommendations for DIY replacement PEUGEOT 107 2008 1.0 Track Rod End
    Step 14
    Screw on a new tie rod end.
    AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements
  15. DIY replacement of Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2009 is not an issue anymore with our step-by-step tutorial
    Step 15
    Connect the tie rod end to the steering knuckle.
  16. How to change Track Rod End on PEUGEOT 107 2005 - free PDF and video manuals
    Step 16
    Screw on the fastening nut that connects the tie rod end to the steering knuckle.Use a drive socket #19.Use a ratchet wrench.
  17. How to replace PEUGEOT 107 Hatchback (PM_, PN_) 1.0 2006 Track Rod End - step-by-step manuals and video guides
    Step 17
    Screw on the tie rod end jam nut. Use a combination spanner #17.Use a combination spanner #19.
  18. PEUGEOT 107 1.4 HDi 2007 Track Rod End replacement: free workshop manuals
    Step 18
    Tighten the tie rod end locknut.Use a combination spanner #17.Use a combination spanner #19.Use a torque wrench.Tighten it to 55 nm torque.
  19. Changing Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi 2008 by yourself
    Step 19
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  20. How to remove PEUGEOT 107 1.0 2009 Track Rod End - online easy-to-follow instructions
    Step 20
    Tighten the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #19.Use a torque wrench.Tighten it to 75 nm torque.
  21. How to replace Track Rod End on PEUGEOT 107 Hatchback (PM_, PN_) 2010: download PDF manuals and video instructions
    Step 21
    Treat the fastener connecting the tie rod end to the steering knuckle. Use copper grease.
  22. How hard is it to do yourself: Track Rod End replacement on PEUGEOT 107 1.0 2011 - download illustrated guide
    Step 22
    Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
  23. Need to know how to renew Track Rod End on PEUGEOT 107 ? This free workshop manual will help you to do it yourself
    Step 23
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  24. Changing of Track Rod End on PEUGEOT 107 2013 won't be an issue if you follow this illustrated step-by-step guide
    Step 24
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  25. PEUGEOT 107 1.0 Track Rod End replacement: online guides and video tutorials
    Step 25
    Screw in the wheel bolts.Use wheel impact socket #17.
  26. Replacing Track Rod End on PEUGEOT 107 2005 1.0 by yourself
    Step 26
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #17.Use a torque wrench.Tighten it to 120 nm torque.
    AUTODOC recommends:
    Check and adjust wheel alignment if necessary.
  27. 107 Hatchback (PM_, PN_) 1.0 2006 Track Rod End DIY replacement workshop manual
    Step 27
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
PEUGEOT 107 Hatchback (PM_, PN_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 107 Hatchback (PM_, PN_) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 107 Hatchback (PM_, PN_)
View more
  • How to change Tie rod end on PEUGEOT 107 Hatchback (PM_, PN_) 1.0 - replacement tricks
    Types and features of run-flat tyres | AUTODOC
  • Changing Tie rod end PEUGEOT 107 1.0 - Replacement Tips
    How to restore the headlights intensity | AUTODOC
  • Maintenance Hacks - PEUGEOT 107 Hatchback (PM_, PN_) 1.4 HDi Tie rod end replacement guide
    How to diagnose engine malfunctions with an OBD2 scanner | Tips from AUTODOC
  • Replace Tie rod end on PEUGEOT 107 - free video tips
    Seized brake caliper: why it happens and how to prevent it | AUTODOC's tips

Manuals for PEUGEOT models