Important!
This replacement procedure can be used for:
FIAT GRANDE PUNTO (199) 1.3 D Multijet, FIAT PUNTO EVO (199) 1.3 D Multijet, FIAT PUNTO Van (199) 1.3 D Multijet, FIAT PUNTO (199) 1.3 D Multijet

The steps may slightly vary depending on the car design.

How to replace tie rod end / track rod end on FIAT PUNTO 199 [TUTORIAL AUTODOC]

Required tools:
Required tools:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #15
Combination spanner #22
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Vernier caliper
Wheel chock
AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. How to change Track Rod End on Fiat Punto 199 2008 - free PDF and video manuals
    Step 1
    Secure the wheels with chocks.
  2. How to replace FIAT GRANDE PUNTO (199) 1.3 D Multijet 2009 Track Rod End - step-by-step manuals and video guides
    Step 2
    Loosen the wheel mounting bolts.Use wheel impact socket #17.
  3. Fiat Punto 199 1.4 2010 Track Rod End replacement: free workshop manuals
    Step 3
    Raise the front of the car and secure on supports.
  4. Changing Track Rod End on FIAT GRANDE PUNTO (199) 1.4 16V 2011 by yourself
    Step 4
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. How to remove FIAT GRANDE PUNTO 1.4 T-Jet 2012 Track Rod End - online easy-to-follow instructions
    Step 5
    Remove the wheel.
  6. How to replace Track Rod End on FIAT GRANDE PUNTO (199) 2013: download PDF manuals and video instructions
    Step 6
    Clean the fastener connecting the tie rod end to the steering knuckle.Use a wire brush.Use WD-40 spray.
  7. How hard is it to do yourself: Track Rod End replacement on Fiat Punto 199 1.4 Natural Power 2014 - download illustrated guide
    Step 7
    Unscrew the end fastening nut to the steering knuckle.Use a drive socket #17.Use a tap wrench.
  8. Need to know how to renew Track Rod End on FIAT GRANDE PUNTO ? This free workshop manual will help you to do it yourself
    Step 8
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  9. Changing of Track Rod End on Fiat Punto 199 2016 won't be an issue if you follow this illustrated step-by-step guide
    Step 9
    Loosen the lock nut securing the tie rod end to the tie rod.Use a combination spanner #22.
  10. FIAT GRANDE PUNTO 1.4 Track Rod End replacement: online guides and video tutorials
    Step 10
    Disconnect the tie rod end from the steering knuckle.
  11. Replacing Track Rod End on Fiat Punto 199 2018 1.3 D Multijet by yourself
    Step 11
    Screw the end out of the tie rod.
  12. GRANDE PUNTO (199) 1.4 T-Jet 2019 Track Rod End DIY replacement workshop manual
    Step 12
    Clean the mounting seats of the tie rod end.Use a wire brush.Use WD-40 spray.
  13. How to change Track Rod End on FIAT GRANDE PUNTO (199) 2020 - tips and tricks
    Step 13
    Screw on a new tie rod end.
    AUTODOC recommends:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements
  14. Step-by-step recommendations for DIY replacement Fiat Punto 199 2008 1.4 T-Jet Track Rod End
    Step 14
    Connect the tie rod end to the steering knuckle.
  15. DIY replacement of Track Rod End on FIAT GRANDE PUNTO (199) 1.2 2009 is not an issue anymore with our step-by-step tutorial
    Step 15
    Screw on the fastening nut that connects the tie rod end to the steering knuckle.Use a drive socket #17.Use a ratchet wrench.
  16. How to change Track Rod End on Fiat Punto 199 2008 - free PDF and video manuals
    Step 16
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward.Use a vernier caliper.
  17. How to replace FIAT GRANDE PUNTO (199) 1.3 D Multijet 2009 Track Rod End - step-by-step manuals and video guides
    Step 17
    Tighten the tie rod end locknut.Use a combination spanner #15.Use a combination spanner #22.Use a torque wrench.Tighten it to 50 nm torque.
  18. Fiat Punto 199 1.4 2010 Track Rod End replacement: free workshop manuals
    Step 18
    Tighten the fastening nut connecting the tie rod end to the steering knuckle.Use a drive socket #17.Use a torque wrench.Tighten it to 70 nm torque.
  19. Changing Track Rod End on FIAT GRANDE PUNTO (199) 1.4 16V 2011 by yourself
    Step 19
    Treat the fastener connecting the tie rod end to the steering knuckle.Use copper grease.
  20. How to remove FIAT GRANDE PUNTO 1.4 T-Jet 2012 Track Rod End - online easy-to-follow instructions
    Step 20
    Treat the surface where the brake disc contacts the wheel rim.Use copper grease.
  21. How to replace Track Rod End on FIAT GRANDE PUNTO (199) 2013: download PDF manuals and video instructions
    Step 21
    Clean the brake disk surface.Use a brake cleaner.
    AUTODOC recommends:
    After applying the spray, wait a few minutes.
  22. How hard is it to do yourself: Track Rod End replacement on Fiat Punto 199 1.4 Natural Power 2014 - download illustrated guide
    Step 22
    Install the wheel.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when screwing in the fastening bolts.
  23. Need to know how to renew Track Rod End on FIAT GRANDE PUNTO ? This free workshop manual will help you to do it yourself
    Step 23
    Screw in the wheel bolts.Use wheel impact socket #17.
  24. Changing of Track Rod End on Fiat Punto 199 2016 won't be an issue if you follow this illustrated step-by-step guide
    Step 24
    Lower the car and working in a cross order, tighten the wheel bolts.Use wheel impact socket #17.Use a torque wrench.Tighten it to 120 nm torque.
    AUTODOC recommends:
    Check and adjust wheel alignment if necessary.
  25. FIAT GRANDE PUNTO 1.4 Track Rod End replacement: online guides and video tutorials
    Step 25
    Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Vehicle maintenance log book
Know what, when and how to repair, and manage your car expenses
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Google Play AUTODOC Club App
App Store AUTODOC Club App
FIAT GRANDE PUNTO (199) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FIAT GRANDE PUNTO (199) Track Rod End replacement - online guide
Tips & tricks for your FIAT GRANDE PUNTO (199)
View more
  • How to change Tie rod end on FIAT GRANDE PUNTO (199) 1.2 - replacement tricks
    How to choose the right dash cam for your car | AUTODOC
  • Changing Tie rod end Fiat Punto 199 1.3 D Multijet - Replacement Tips
    What to do if your check engine light is on | Tips from AUTODOC
  • Maintenance Hacks - FIAT GRANDE PUNTO (199) 1.4 Tie rod end replacement guide
    Basic rules for driving all types of transmissions | AUTODOC
  • Replace Tie rod end on Fiat Punto 199 - free video tips
    Types and features of run-flat tyres | AUTODOC