Important!
This replacement procedure can be used for:
VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.9 D, VW GOLF III (1H1) 1.9 TD, GTD, VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 2.0, VW GOLF III (1H1) 2.0 GTI 16V, VW GOLF III (1H1) 2.8 VR6, VW GOLF III (1H1) 2.9 VR6 Syncro (1HX1), VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 2.0 Syncro (1HX1), VW GOLF III (1H1) 1.9 TDI Syncro (1HX1), VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) Citystromer, VW GOLF III (1H1) 1.9 SDI, VW GOLF III (1H1) 1.3, VW GOLF III (1H1) 2.0 GL, VW GOLF III (1H1) 2.8 VR6 View more

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on VW GOLF 3 TUTORIAL | AUTODOC

video
All the parts you need to replace – Track Rod End for GOLF III (1H1) and other VW models
Tools
Replacement: track rod end – VW Golf 3. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #22
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
Replacement: track rod end – VW Golf 3. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – VW Golf 3. Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on Golf 3 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW GOLF III (1H1) 2.8 VR6 1992 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Golf 3 2.0 1993 Track Rod End replacement: free workshop manuals
    Raise the front of the car and secure on supports.
  4. Step 4
    Changing Track Rod End on VW GOLF III (1H1) 1.9 TDI 1994 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. VW Golf 3
  5. Step 5
    How to remove VW GOLF 1.6 1995 Track Rod End - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Track Rod End on VW GOLF III (1H1) 1996: download PDF manuals and video instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  7. Step 7
    Clean the lock nut that connects the tie rod to the tie rod end. Use a wire brush. Use WD-40 spray.
    Step 8
    How hard is it to do yourself: Track Rod End replacement on Golf 3 2.0 GTI 16V 1997 - download illustrated guide
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  8. Step 9
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 10
    Need to know how to renew Track Rod End on VW GOLF 1998? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #19. Use a ratchet wrench.
  9. Step 11
    Changing of Track Rod End on Golf 3 1991 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 12
    VW GOLF 2.8 VR6 Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 13
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
    Step 14
    Replacing Track Rod End on Golf 3 1993 2.8 VR6 by yourself
    Screw on a new tie rod end.
    Replacement: track rod end – VW Golf 3. Tip from AUTODOC experts:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW GOLF III (1H1) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW GOLF III (1H1) Track Rod End replacement - online guide
Tips & tricks for your VW GOLF III (1H1)
View more
  • How to change Tie rod end on VW GOLF III (1H1) 1.8 - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing Outer tie rod Golf 3 2.8 VR6 - Replacement Tips
    How to detect vacuum leaks using a smoke machine | AUTODOC
  • Maintenance Hacks - VW GOLF III (1H1) 2.0 Track rod end ball joint replacement guide
    What to do if your check engine light is on | AUTODOC tips
  • Replace Outer tie rod end on Golf 3 - free video tips
    Top 5 mistakes when buying car parts