Important!
This replacement procedure can be used for:
VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.9 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.2 12V, VW POLO (9N_) 1.9 SDI, VW POLO (9N_) 1.2, VW POLO (9N_) 1.4 16V, VW POLO (9N_) 1.4 FSI, VW POLO (9N_) 1.9 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.4 TDI, VW POLO (9N_) 1.8 GTI, VW POLO (9N_) 1.6 16V, VW POLO (9N_) 1.6, VW POLO (9N_) 1.8 GTi Cup Edition, VW POLO (9N_) 1.2, VW POLO (9N_) 1.2 12V, VW POLO (9N_) 1.4 View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing / rear hub bearing on VW POLO 4 (9N) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for POLO (9N_) and other VW models
How to change Wheel bearing kit on VW Polo Mk4 1.4 16V – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing on VW Polo Mk4 1.4 16V – step-by-step instructions for straightforward car repair Wheel bearing
How to change Cap, wheel bearing on VW Polo Mk4 1.4 16V – step-by-step instructions for straightforward car repair Cap, wheel bearing
Tools
Replacement: wheel bearing – VW Polo 9N. List of the tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
12-point socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Rubber mallet
Phillips screwdriver
Crow bar
Wheel chock
Replacement: wheel bearing – VW Polo 9N. AUTODOC recommends:
  • Do not re-use the bearing assembly of your VW Polo 9N car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – VW Polo 9N – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on VW Polo Mk4 2001 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW POLO (9N_) 1.4 16V 2002 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    VW Polo Mk4 1.2 12V 2003 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on VW POLO (9N_) 1.2 2004 by yourself
    Unscrew the wheel bolts.
    Replacement: wheel bearing – VW Polo 9N. Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  5. Step 5
    How to remove VW POLO 1.9 TDI 2005 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Wheel Bearing on VW POLO (9N_) 2006: download PDF manuals and video instructions
    Clean the brake drum. Use a wire brush. Use WD-40 spray.
  7. Step 7
    How hard is it to do yourself: Wheel Bearing replacement on VW Polo Mk4 1.4 16V 2007 - download illustrated guide
    Unscrew the brake drum fastening. Use a Phillips screwdriver.
  8. Step 8
    Need to know how to renew Wheel Bearing on VW POLO 2008? This free workshop manual will help you to do it yourself
    Remove the brake drum.
    Replacement: wheel bearing – VW Polo 9N. AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  9. Step 9
    Changing of Wheel Bearing on VW Polo Mk4 2009 won't be an issue if you follow this illustrated step-by-step guide
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – VW Polo 9N. Tip from AUTODOC:
    Some cars are not equipped with wheel hub caps.
  10. Step 10
    VW POLO 1.4 TDI Wheel Bearing replacement: online guides and video tutorials
    Unscrew the wheel hub axle nut. Use drive 12-point socket #30. Use a tap wrench.
  11. Step 11
    Replacing Wheel Bearing on VW Polo Mk4 2011 1.4 16V by yourself
    Remove the hub and the bearing together, since they are a sealed unit.
  12. Step 12
    POLO (9N_) 1.9 TDI 2012 Wheel Bearing DIY replacement workshop manual
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  13. Step 13
    How to change Wheel Bearing on VW POLO (9N_) 2001 - tips and tricks
    Install the new wheel hub with a bearing.
  14. Step 14
    Step-by-step recommendations for DIY replacement VW Polo Mk4 2002 1.9 TDI Wheel Bearing
    Tighten the hub. Use drive 12-point socket #30. Use a torque wrench. Tighten it to 175 nm torque.
    Replacement: wheel bearing – VW Polo 9N. Professionals recommend:
    The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW POLO (9N_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW POLO (9N_) Wheel Bearing replacement - online guide
Tips & tricks for your VW POLO (9N_)
View more
  • How to change Wheel bearings on VW POLO (9N_) 1.4 TDI - replacement tricks
    3 things that cause engine damage | AUTODOC tips
  • Changing Hub bearing VW Polo Mk4 1.4 16V - Replacement Tips
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Maintenance Hacks - VW POLO (9N_) 1.2 12V Wheel bearing kit replacement guide
    Important differences between car tools | AUTODOC tips
  • Replace Wheel hub bearing on VW Polo Mk4 - free video tips
    Why do your brakes squeak? | AUTODOC tips