Important!
This replacement procedure can be used for:
VW GOLF III (1H1) 1.9 TD, GTD, VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8, VW GOLF III (1H1) 1.8 Syncro (1HX1), VW GOLF III (1H1) 2.0, VW GOLF III (1H1) 2.0 GTI 16V, VW GOLF III (1H1) 1.4, VW GOLF III (1H1) 2.8 VR6, VW GOLF III (1H1) 1.6, VW GOLF III (1H1) 2.0 Syncro (1HX1), VW GOLF III (1H1) 1.9 TDI Syncro (1HX1), VW GOLF III (1H1) 1.9 TDI, VW GOLF III (1H1) 1.9 SDI, VW GOLF III (1H1) 2.8 VR6 View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing on VOLKSWAGEN GOLF 3 (1H1) [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for GOLF III (1H1) and other VW models
Tools
Replacement: wheel bearing – VW Golf 3. Tools you'll need:
Wire brush
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 24
Wheel impact socket #17
Bush and bearing driver set
Pin punch
Tap wrench
Hammer
Rubber mallet
Flat Screwdriver
Crow bar
Wheel chock
Replacement: wheel bearing – VW Golf 3. AUTODOC recommends:
  • Do not re-use the bearing assembly of your VW Golf 3 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – VW Golf 3. Recommended sequence of steps:
  1. Step 1
    How to change Wheel Bearing on Golf 3 1991 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW GOLF III (1H1) 2.8 VR6 1992 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Golf 3 2.0 1993 Wheel Bearing replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Wheel Bearing on VW GOLF III (1H1) 1.9 TDI 1994 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. VW Golf 3
  5. Step 5
    How to remove VW GOLF 1.6 1995 Wheel Bearing - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Wheel Bearing on VW GOLF III (1H1) 1996: download PDF manuals and video instructions
    Remove the wheel hub nut cap. Use a crowbar. Use a hammer.
  7. Step 7
    How hard is it to do yourself: Wheel Bearing replacement on Golf 3 2.0 GTI 16V 1997 - download illustrated guide
    Remove the cotter pin securing the hub nut. Use a crowbar.
  8. Step 8
    Need to know how to renew Wheel Bearing on VW GOLF 1998? This free workshop manual will help you to do it yourself
    Unscrew the hub nut. Use a drive socket #24. Use a tap wrench.
  9. Step 9
    Changing of Wheel Bearing on Golf 3 1991 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake drum assembled with the wheel hub bearing. Use a flat screwdriver.
    Replacement: wheel bearing – VW Golf 3. Tip:
    Examine the brake drum. Replace it if necessary.
  10. Step 10
    VW GOLF 2.8 VR6 Wheel Bearing replacement: online guides and video tutorials
    Remove the wheel hub bearing retaining ring. Use a crowbar.
  11. Step 11
    Replacing Wheel Bearing on Golf 3 1993 2.8 VR6 by yourself
    Remove the hub bearing mounting. Use a crowbar.
  12. Step 12
    GOLF III (1H1) 1.6 1994 Wheel Bearing DIY replacement workshop manual
    Remove the inner race of the wheel bearing from the brake drum. Use a pin punch. Use a hammer.
  13. Step 13
    How to change Wheel Bearing on VW GOLF III (1H1) 1995 - tips and tricks
    Install the new inner race of the wheel bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
  14. Step 14
    Step-by-step recommendations for DIY replacement Golf 3 1996 1.6 Wheel Bearing
    Treat the inner race and the wheel bearing. Use a multipurpose grease.
  15. Step 15
    DIY replacement of Wheel Bearing on VW GOLF III (1H1) 1.8 1997 is not an issue anymore with our step-by-step tutorial
    Install a new hub bearing and secure it.
  16. Step 16
    How to change Wheel Bearing on Golf 3 1991 - free PDF and video manuals
    Install the wheel hub bearing retaining ring. Use a bush and bearing driver set. Use a hammer.
  17. Step 17
    How to replace VW GOLF III (1H1) 2.8 VR6 1992 Wheel Bearing - step-by-step manuals and video guides
    Clean the stub axle. Use all-purpose cleaning spray. Use WD-40 spray.
  18. Step 18
    Golf 3 2.0 1993 Wheel Bearing replacement: free workshop manuals
    Install the brake drum assembled with the wheel hub bearing.
  19. Step 19
    Changing Wheel Bearing on VW GOLF III (1H1) 1.9 TDI 1994 by yourself
    Apply special grease to the bearing assembly mounting seat. Use a multipurpose grease.
  20. Step 20
    How to remove VW GOLF 1.6 1995 Wheel Bearing - online easy-to-follow instructions
    Tighten the wheel hub nut. Use a drive socket #24. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf III Hatchback (1H1) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW GOLF III (1H1) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW GOLF III (1H1) Wheel Bearing replacement - online guide
Tips & tricks for your VW GOLF III (1H1)
View more
  • How to change Wheel bearings on VW GOLF III (1H1) 1.8 - replacement tricks
    Top 5 reasons why the suspension knocks | AUTODOC tips
  • Changing Hub bearing Golf 3 2.8 VR6 - Replacement Tips
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
  • Maintenance Hacks - VW GOLF III (1H1) 2.0 Wheel bearing kit replacement guide
    DIY brake caliper restoration | AUTODOC tips
  • Replace Wheel hub bearing on Golf 3 - free video tips
    How to remove scratches from a car | AUTODOC tips