Important!
This replacement procedure can be used for:
SUZUKI SWIFT III (MZ, EZ) 1.3 (RS 413, ZC11S), SUZUKI SWIFT III (MZ, EZ) 1.3 DDiS (RS 413D), SUZUKI SWIFT III (MZ, EZ) 1.3 DDiS (RS 413D), SUZUKI SWIFT III (MZ, EZ) 1.3 4x4 (RS 413, ZD11S), SUZUKI SWIFT III (MZ, EZ) 1.6 (RS 416, RR 416, ZC31S), SUZUKI SWIFT III (MZ, EZ) 1.3 4x4 (RS 413, ZD11S), SUZUKI SWIFT III (MZ, EZ) 1.3 LPG (RS 413) View more

The steps may slightly vary depending on the car design.

How to change rear wheel bearing on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

video
All the parts you need to replace – Wheel Bearing for SWIFT III (MZ, EZ) and other SUZUKI models
How to change Wheel bearing kit on Suzuki Swift Mk3 1.3 (RS 413, ZC11S) – step-by-step instructions for straightforward car repair
Wheel bearing kit
How to change Wheel bearing on Suzuki Swift Mk3 1.3 (RS 413, ZC11S) – step-by-step instructions for straightforward car repair
Wheel bearing
Tools
Replacement: wheel bearing – Suzuki Swift MK3. Tools you need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 30
Wheel impact socket #21
Ratchet wrench
Torque wrench
Flat chisel
Hammer
Flat Screwdriver
Bush and bearing driver set
Circlip pliers
Rubber mallet
Wheel chock
AUTODOC recommends:
  • Do not re-use the bearing assembly of your Suzuki Swift MK3 car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – Suzuki Swift MK3 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Suzuki Swift Mk3 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace SUZUKI SWIFT III (MZ, EZ) 1.3 (RS 413, ZC11S) 2006 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Suzuki Swift Mk3 1.3 DDiS (RS 413D) 2007 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Suzuki Swift MK3
  4. Step 5
    Changing Wheel Bearing on SUZUKI SWIFT III (MZ, EZ) 1.5 (RS 415) 2008 by yourself
    Remove the wheel.
  5. Step 6
    How to remove SUZUKI SWIFT 1.3 4x4 (RS 413, ZD11S) 2009 Wheel Bearing - online easy-to-follow instructions
    Remove the hub bearing protection cap. Use a flat metal-working chisel. Use a hammer. Use a flat screwdriver.
    Please note!
    Some cars are not equipped with wheel hub caps.
  6. Step 7
    Clean the wheel hub fastener. Use a wire brush. Use WD-40 spray.
    Step 8
    How to replace Wheel Bearing on SUZUKI SWIFT III (MZ, EZ) 2010: download PDF manuals and video instructions
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Suzuki Swift Mk3 1.5 4x4 (RS 415, ZD21S) 2011 - download illustrated guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – Suzuki Swift MK3. Tip from AUTODOC experts:
    Examine the brake drum. Replace it if necessary.
  8. Step 10
    Need to know how to renew Wheel Bearing on SUZUKI SWIFT 2012? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 11
    Changing of Wheel Bearing on Suzuki Swift Mk3 2013 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 12
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
    Step 13
    SUZUKI SWIFT 1.3 DDiS (RS 413D) Wheel Bearing replacement: online guides and video tutorials
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set. Use a hammer.
    Replacement: wheel bearing – Suzuki Swift MK3. Professionals recommend:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
SUZUKI SWIFT III (MZ, EZ) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY SUZUKI SWIFT III (MZ, EZ) Wheel Bearing replacement - online guide
Tips & tricks for your SUZUKI SWIFT III (MZ, EZ)
View more
  • How to change Wheel bearings on SUZUKI SWIFT III (MZ, EZ) 1.6 (RS 416, RR 416, ZC31S) - replacement tricks
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Changing Hub bearing Suzuki Swift Mk3 1.3 (RS 413, ZC11S) - Replacement Tips
    How to repair a bumper yourself | AUTODOC tips
  • Maintenance Hacks - SUZUKI SWIFT III (MZ, EZ) 1.3 DDiS (RS 413D) Wheel bearing kit replacement guide
    What to do if the ABS light comes on | AUTODOC tips
  • Replace Wheel hub bearing on Suzuki Swift Mk3 - free video tips
    Headlight Restoration | AUTODOC tips

Professional manuals for the most common SUZUKI models